Note: Ingredients listed on restricted chemical lists
EC/CAS
247-063-2/25513-64-8
Name of the chemical
mixture of (35-45 % w/w) 1,6-diamino-2,2,4-trimethylhexane and (55-65 % w/w)1,6-diamino-2,4,4-trimethylhexane
Concentration
<20
EC/CAS
204-881-4/128-37-0
Name of the chemical
2,6-di-tert-butyl-p-cresol
Concentration
<0.5
General Information
Revision date
2022-11-17
Product name
Gorilla Epoxy (Hardener)
REACH No
Not
1.2.1 Relevant identified uses
Hardener
supplier name
GG Brands Netherlands B.V
Manufacturer Name
Gorilla Glue Europe Ltd
Emergency telephone
+44 (0)843 507 1200
Icons in SDS
Company Information
company name
Gorilla Glue Europe Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
Eucustomercare@gorillaglue.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H314, H315, H317, H318, H412
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage
Section 2
SECTION 2: Hazards identification
According to Regulation (EC) No. 1272/2008 (CLP)]
Hazard pictograms
GHS05 GHS07
Signal word
Danger
Hazard statements
H315: Causes skin irritation. H317: May cause an allergic skin reaction. H318: Causes serious eye damage. H412: Harmful to aquatic life with long lasting effects.
Precautionary statements
P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P261: Avoid breathing vapours. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. P501: Dispose of contents in accordance with local, state or national legislation.
2.3 Other hazards
None known.
Additional information
For full text of H/P Statements see section 16. Note Gorilla Epoxy contains 2,2,4(or 2,4,4)-trimethylhexane-1,6-diamine CAS No. 25513-64-8 which, according to Annex 1, Table 3.2.3 of CLP carries the H314: corrosive classification. Product level dermal corrosivity testing for Gorilla Epoxy confirms the product is classified as a skin irritant rather than corrosive. Positive results in a valid and accepted skin corrosion test (Corrositex test) classifies the mixture as Non-corrosive utilizing multiple replicate samples indicating highly reproducible results. As a result, the health hazard and transport classification have been changed to reflect the Epoxy results: UN Non-Corrosive and not a
Hazard categories
1
