EY-650-458-4

SECTION 2: Hazards identification

Noi a hazardous substance or mixture.

2.2 Label elements

Labelling (REGULATION 29 CFR Parts 1910, 1915, and 1926).

2.3 Other hazards

None

Ingredient(s) with unknown acute toxicity

The following percentage of the mixture consists of ingredient{s} with unknown acute toxicity: 0 % Administrative mformation Report information SDS. USIENGHS_SDS_NA_REGIONIZ8 Saies & Distribition information EGO1FLIUS 10/01 Shipping Order Informsation 28, /24,578,664 1t Treat symptomaticafiy. i SECTION 5. FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemizal or carbon dioxide Unsuitable extinguishing : no datz available media Special hazards arising from the substance or mixture Specific hazards during firefighting Advice for firefighters © nodata available Special protective equipment for firefighters 1 Wear self-contained breathing apparatus for firefighting if necessary.

Further information

Slandard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures For amergency conditions, use an approved positive-pressure self-contained breathing apparalus. Material can create slippery conditions. Environmental precautions Prevent prodict from entering drains. if the product contaminates rivers and lakes or drains inform respective authorities, Methods and materials for containment and cleaning up Clean contaminated fioors and objects thoroughly while observing environmentat regulations. Wipe up with absarbent material (e.g. cloth, fleece). Keep in suitable, closed containars for disposal Administratve information Report Information: SD5_US/ENGHS_SDS_NA_REGIONI28 Ssles & Distribution Information: EDOT/FLIUS10i0 1 { Shipping Qrder in A11/24,578,664 _ Engineering measures Use engineering controls to maintain airborne levels below exposure fimit requiremens o quidelines. If there are no applicable exposure limit requiremants or guidelines, usa the product only with adequate ventilation Personal protective equipment Eye/face protection : Use safety glasses tested according to EN 166/ANSt Z87.1 or equivalent local standard. Hand protection © Use gloves when handiing substance in open systems. Inspect gioves prior to use. Train operators for proper use.if only incidental exposure is expected: (work without direct contact fo substance) use gloves lesled according EN 16523~ 1IASTM F739 or equivalent local standard breakihrough times at leasl 10 minutes, tested for chemicals indicated in chapter 3 of this SDS. Change gloves frequentiy. If direct skin contact is expected: use gloves tested according to EN 16523-1/ASTM F739 or equivalent local standard, tested for chemicals indicated in chapter 3 of this SDS. Permeation time must exceed contact time. Other skin protection © Wear working clothes covering arms and legs. Respiratory protection : Respiratory protection should be worn when workpiace exposires exceed exposure limit requirements or guidelines. if there are no applicable exposure limits or guidelines, use an approved respirator where there is a potential for adverse effects, including but not limited to respiratory irritation or odor, or where indicated by the exposure assessment. Selection of air-purifying or positive-pressure supplied-air will depend on the results of the exposure assessment which includes an evaluation of the specific operations and the potential airborne concentrations. For emergency conditions, use an approved positive-pressure self.contained breathing apparatus. In case a risk analysis proved the cartridge respirator as 1 acceptable, use type: ABEK-P3 {EN 14387) OR Combination Multi-gas/F 100 H (42CFR84.193; ANSI Z88.7 or equivalent local standard) as a backup to engineering controls. In absence of engineering controls, use seif-contaited breathing apparatus or full face supplied air respirators. Use respirators and components tested and approved under appropriate government standards such as CEN (EU} or NIOSH 42 CFR 84{US}). Adminisirative information Report Information: SDS_US/EN'GHS_SDS_NA_REGIONIZS Sales & Distribution information: EDOH/FLAUS 10/01 | Shipping Order Information; 29,019,411124,578,664 10. STABILITY AND SECTION ‘ REACTIVITY Reactivity l decomposition if stored and applied as directed. i No Chemical stability No decomposition if stored and applied as directed. Possibility of hazardous reactions Hazardous reactions . Stable under recommended storage conditions., No hazards . specially mentioned No dangerous reaction known 1o be under conditions of normat use. Conditions to avoid Gonditions to avoid : no data avaiiable Incompatible materials Materials to avoid : no data available Hazardous decomposition products Harzardous decomposition no data available products Thermal decomposition no data available SECTION 11. TOXICOLOGICAL INFORMATION information on toxicological effects Acute oral toxicity © No data is avaiable on the product itself. Acute inhatation toxicity No data is available on the product itseif Acute dermal toxicity © No data is available on the product itsell. Acute toxicity (other routes No data is available on the product itself. of administration) Skin corrosionfirritation . No data is avaiiable on the product itself. Serious eye damageleye © No data is available on the product itself irritation Administrative information: Report Information: SDS, USIENGHS_SDS_NA_REGION'Z8 Sales & Distribution tnformation: EDOHFLIUS10/01 Shipping Ordler Information: 26,019.411/24, 578,864 __ 744 Supplier Part Number:EY-650-458-4 Lifecycle Phase:ACT!