Note: Ingredients listed on restricted chemical lists
EC/CAS
203-448-7/106-97-8
Name of the chemical
n-Butan, enthält 0,1% Butadien
Concentration
1-<10%
EC/CAS
215-185-5/1310-73-2
Name of the chemical
sodium hydroxide
Concentration
2-<5%
General Information
Revision date
2016-08-11
Product name
11201002 Toro - Clean MF -250 ml-
1.2.1 Relevant identified uses
Cleaning agent/ Cleaner
1.2.2. Uses advised against
No further relevant information available
Emergency telephone
Während der normalen Öffnungszeiten +49 9192 - 993290
Icons in SDS
Company Information
company name
GfK Thomas Jakob und Robert Krämer GbR
e-mail address of the competent person responsible for the Safety Data Sheet
info@gfk-deutschland.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H314, H318
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
CLP CLASSIFICATION
GHS02 flame Aerosol 1 H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated. GHS05 corrosion Skin Corr. 1A H314 Causes severe skin burns and eye damage. Eye Dam. 1 H318 Causes serious eye damage.
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008 The product is classified and labelled according to the CLP regulation.
Hazard pictograms
GHS02 GHS05
Signal word
Danger
Hazardous Ingredients
sodium hydroxide
Hazard statements
H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated. H314 Causes severe skin burns and eye damage.
Precautionary statements
P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (Contd. of page 1) P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P280 Wear protective gloves / eye protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Additional information
Buildup of explosive mixtures possible without sufficient ventilation.
PBT Substances
Not applicable
vPvB Substances
Not applicable *
