CJ-801 Black

Hazardous Ingredients

INGREDIENT NAME CAS NO. % EXPOSURE LIMITS 10.00 mg/M3 (OSHA PEL TWA) total dust Kaolin Clay 1332-58-7 <10.00 5.00 mg/M3 (OSHA PEL TWA) respirable dust 2.00 mg/M3 (ACGIH TLV TWA)respirable dust 3.50 mg/M3 (OSHA PEL TWA) Carbon Black 1333-86-7 <17.00 3.50 mg/M3 (ACGIH TLV TWA) 2.00 mg/M3 (OSHA PEL TWA) Talc 14807-96-6 <17.00 2.00 mg/M3 (ACGIH TLV TWA) 10.00 mg/M3 (OSHA PEL TWA) Magnesium Oxide 1309-48-4 <2.00 10.00 mg/M3 (ACGIH TLV TWA) 0.50 mg/M3 (OSHA PEL TWA) Antimony Trioxide 1309-64-4 <1.00 0.50 mg/M3 (ACGIH TLV TWA) None (OSHA PEL TWA) Organic Peroxide Mixture <1.00 None (ACGIH TLV TWA) NEL (OSHA PEL TWA) Alpha-quartz 14808-60-7 <0.10 0.025 mg/M3 (ACGIH TLV TWA) (respirable dust of silica)

Additional information

This mixture has not been evaluated as a whole and is not expected to present unusual hazard under normal conditions of use. Ingredients of this mixture are encapsulated into the polymer matrix and are not expected to present the same exposure effects as in the neat state of the chemical. Should significant vapors/fumes be generated during thermal processing of this product, it is recommended that workstations be monitored for the presence of thermal degradation by-products, which may evolve at elevated temperatures. It is recommended that the current ACGIH-TLV’s for these materials be observed. SECTION III - HAZARD IDENTIFICATION Emergency Overview: Hazards described herein may exist if material is in a fume or dust state. This material can burn in fire releasing toxic vapors, gases, and fumes. Relevant Routes of Exposure: Inhalation, Eye or Skin Contact Signs and Symptoms of Acute Overexposure: Irritation of eyes, skin & respiratory tract. Medical Conditions Generally Aggravated By Individuals with chronic respiratory disorders may be Exposure: adversely affected by any fume or airborne particulate exposure. Sensitive individuals may be susceptible to allergic reaction from contact with skin, eyes, or respiratory tract. Potential Health Effects: SECTION III - HAZARD IDENTIFICATION Eyes: Dust or particulate may cause irritation or scratch the surface of the eye. Fumes from heated material may be irritating. Skin: Though not expected to present significant skin irritation under normal conditions of use, prolonged exposure may cause slight irritation. Rubbing may cause irritation similar to sand or dust. Burns may occur from heated material. Ingestion: May cause choking if swallowed. Single dose oral toxicity is believed to be low. Inhalation: Exposures to dusts or fumes may cause irritation to the respiratory tract. Prolonged exposures at high concentrations could cause nausea, drowsiness, or headache. Carcinogenicity: NTP: No IARC: No OSHA: No ACGIH: No OTHER: No