General Information
Revision date
2020-05-21
Product name
TRISILYLAMINE
Substance name
TRISILYLAMINE
Product Synonyms
DISILAZANE, 2-SILYL- SILANE, NITRILOTRIS-
Chemical name
HYDRIDOSILANE
CAS No.
13862-16-3
Icons in SDS
Company Information
company name
GELEST, INC
e-mail address of the competent person responsible for the Safety Data Sheet
info@gelest.com, info@gelestde.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H260, H314, H318, H330, H335
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
CLP CLASSIFICATION
Flammable liquids, Category 2 H225 Substances and Mixtures which, in contact with water, emit flammable H260 gases, Category 1 Acute toxicity (inhalation:vapour) Category 2 H330 Skin corrosion/irritation, Category 1B H314 Serious eye damage/eye irritation, Category 1 H318 Specific target organ toxicity — Single exposure, Category 3, H335 Respiratory tract irritation
Hazard statements
see section 16 : H225 - Highly flammable liquid and vapour. H260 - In contact with water releases flammable gases which may ignite spontaneously. H314 - Causes severe skin burns and eye damage. H330 - Fatal if inhaled. H335 - May cause respiratory irritation.
Adverse physicochemical, human health and environmental effects
No additional information available
2.2 Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]
Hazard pictograms
GHS02 GHS05 GHS06
Signal word
Danger
Precautionary statements
P280 - Wear protective gloves/protective clothing/eye protection/face protection. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P223 - Do not allow contact with water. P231+P232 - Handle under inert gas. Protect from moisture. P240 - Ground/bond container and receiving equipment. P310 - Immediately call a POISON CENTER or doctor.
Supplemental label elements
EUH014 - Reacts violently with water.
Other hazards which do not result in classification
This compound reacts with moisture in living tissue to generate ammonia. The US ACGIH (TWA) for ammonia is 25 ppm.