DIETHYLZINC, 95%

Hazard statements (CLP)

H225, H250, H260, H314, H318

Code

Statements

H225

Highly Flammable liquid and vapour

Classification (GHS-US)

Flam. Liq. 2 H225 Pyr. Liq. 1 H250 Water-react. 1 H260 Skin Corr. 1B H314 Eye Dam. 1 H318

Hazard statements

see section 16 : H225 - Highly flammable liquid and vapor H250 - Catches fire spontaneously if exposed to air H260 - In contact with water releases flammable gases which may ignite spontaneously H314 - Causes severe skin burns and eye damage H318 - Causes serious eye damage

2.2 Label elements

GHS-US labeling

Hazard pictograms

GHS02 GHS05

Signal word

Danger

Precautionary statements

P280 - Wear protective gloves/protective clothing/eye protection/face protection P310 - Immediately call a doctor P210 - Keep away from heat, open flames, sparks. - No smoking P222 - Do not allow contact with air P223 - Do not allow contact with water P231+P232 - Handle under inert gas. Protect from moisture P233 - Keep container tightly closed P240 - Ground/Bond container and receiving equipment P241 - Use explosion-proof ventilating equipment P242 - Use only non-sparking tools P243 - Take precautionary measures against static discharge P260 - Do not breathe vapors P264 - Wash hands thoroughly after handling P301+P330+P331 - If swallowed: rinse mouth. Do NOT induce vomiting 06/17/2016 EN (English US) SDS ID: OMZN017 P302+P334 - If on skin: Immerse in cool water/wrap with wet bandages P303+P361+P353 - If on skin (or hair): take off immediately all contaminated clothing. rinse skin with water/shower P304+P340 - If inhaled: Remove person to fresh air and keep comfortable for breathing P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P321 - Specific treatment (see first aid instructions on this label) P335+P334 - Brush off loose particles from skin. Immerse in cool water/wrap in wet bandages P363 - Wash contaminated clothing before reuse P370+P378 - In case of fire: Use dry extinguishing powder to extinguish P402+P404 - Store in a dry place. Store in a closed container P403+P235 - Keep in a cool place P405 - Store locked up P422 - Store contents under dry inert atmosphere P501 - Dispose of contents/container to licensed waste disposal facility

Other hazards which do not result in classification

TLV is not established; OSHA PEL is not established; Gelest Recommendation for metal alkyls: 2mg/m3). 2.4.

Ingredient(s) with unknown acute toxicity

No data available