BRASURE_CUIVRE_PHOSPHORE_ARGENT

2.1 Classification of the substance or mixture

In compliance with EC regulation No. 1272/2008 and its amendments. This mixture does not present a physical hazard. Refer to the recommendations regarding the other products present on the site. This mixture does not present a health hazard with the exception of possible occupational exposure thresholds (see paragraphs 3 and 8). This mixture does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use.

2.2 Label elements

In compliance with EC regulation No. 1272/2008 and its amendments. No labelling requirements for this mixture.

2.3 Other hazards

In the event of dust formed by mechanical action (sanding, sawing, etc..), this dust may cause irritation by inhalation and contact with eyes. The mixture does not contain substances classified as ‘Substances of Very High Concern' (SVHC) >= 0.1% published by the European CHemicals Agency (ECHA) under article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table The mixture fulfils neither the PBT nor the vPvB criteria for mixtures in accordance with annexe XIII of the REACH regulations EC 1907/2006. Brazing, heating, grinding and machining operations, which cause the temperature of the product to rise around the melting point or by generating volatile particles, can be detrimental to health. Dust and fumes can emerging during the implementation, specifically at the time of brazing, thermal cutting and grinding.Long-term inhalation of ambient air heavily loaded with dust and fumes can affect the health of workers. In addition, IARC and NIOSH indicate that fumes from metal combustion are suspected to be carcinogens The operations mentioned above must be carried out in a well ventilated environment. The main risk of exposure is inhalation. (Inhalation of solder fumes)