Note: Ingredients listed on restricted chemical lists
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
General Information
Version
5.0 (replaces version 1.0
Revision date
2022-07-04
Product name
BETEC 140
1.2.1 Relevant identified uses
Grouting Materials
1.2.2. Uses advised against
advised against No further relevant information available
Emergency telephone
800-424-9300, +1 703-741-5970, +(44)-870-8200418
Icons in SDS
Company Information
company name
GCP Germany GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
msds.gcp@gcpat.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H318, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture Depending on the type of handling and use, airborne respirable crystalline silica may be generated. Prolonged and/or massive inhalation of respirable silica dust may cause silicosis. Occupational exposure to respirable crystalline silica should be monitored and controlled This product should be handled with care to avoid dust generation
Hazard pictograms
d ~ d ~ GHS05 GHS07
Signal word
Danger (Contd. on page 2) GB (Contd. of page 1)
Hazardous Ingredients
Portland cement
Hazard statements
H315 Causes skin irritation. H318 Causes serious eye damage. H335 May cause respiratory irritation.
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves / eye protection / face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER/doctor.
Additional information
Avoid breathing dust
PBT Substances
Not applicable
vPvB Substances
Not applicable
2.1 Classification of the substance or mixture
Depending on the type of handling and use, airborne respirable crystalline silica may be generated. Prolonged and/or massive inhalation of respirable silica dust may cause silicosis. Occupational exposure to respirable crystalline silica should be monitored and controlled. This product should be handled with care to avoid dust generation. Classification according to Regulation (EC) No 1272/2008 Skin Irrit. 2 H315 Causes skin irritation. Eye Dam. 1 H318 Causes serious eye damage. STOT SE 3 H335 May cause respiratory irritation.