General Information
Revision date
2020-03-09
Product name
Gardner Drive Seal 8
Product Synonyms
Asphalt emulsion driveway sealer
1.2.1 Relevant identified uses
‐ Filler and sealant for asphalt pavements Synonyms ‐ Low VOC Water Based Asphalt Coating
Manufacturer Name
Gardner-Gibson
Emergency telephone
800-424-9300
Icons in SDS
Company Information
company name
Gardner-Gibson
GHS Information
Signal word
Section 2
SECTION 2: Hazards identification
Hazard statements
AND PRECAUTIONS
Signal word
Causes Skin Irritation (Category 2) Causes Eye Irritation (Category 2B)
Prevention
Wash hand and exposed skin thoroughly after handling. Remove shoes and clothing that have been contaminated with material.
Response
If on skin Wash with plenty of water. If skin irritation occurs Get medical advice/attention. Take off contaminated clothing and wash it before reuse. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Additional Product Information: Contains Petroleum Based Products. For Exterior Use Only. Use only with adequate ventilation. Keep product closed and properly stored when not in use. Avoid contact with skin. Use protective gloves, safety glasses, and protective clothing when using this product. Do not use in drinking water or food systems. Do not reuse empty container. Make sure container is sealed and secured in an upright position during transportation. Do not eat or drink while using this product and wash hand thoroughly after use. Physical Form ‐ Liquid Color ‐ Black Odor ‐ Mild Hydrocarbon. Flash Point ‐ 460° F
Principle Routes of Exposure
Skin, Eye Carcinogenic Effects CAS IARC NTP Asphalt (High Temp Fumes) This 8052‐42‐4 Group 2B‐Possible Carcinogen Under Consideration product applied cold at ambient temperatures. Quartz (This product encapsulated) 14808‐60‐7 Group 1‐Carcinogenic Known Human Carcinogen
Further information
This product is an encapsulated mixture which reduces the likelihood of exposure to hazardous particulates. Airborne exposures to hazardous dusts or mists may be generated by spraying, sanding or grinding. During spraying or sanding the product, wear suitable respiratory equipment to protect against inhalation of mist and dust. See Section 12 for Ecological Information.