CleverDeck & EnviroSlat Original Composite Decking/Cladding

SECTION 2: Hazards identification

Restriction of Hazardous Substances Directive (RoHS),2002/95/EC Compounds Tested Item(mg/kg) RoHS' Limits(mg/kg) 1 Lead (Pb) 30.10 1000 Mercury (Hg) ND 1000 Cadmium (Cd) ND 100 Chromium VI (Cr VI) ND 1000 Polybrominated Biphenyls (PBBs) ND Bromobiphenyls ND Dibromobiphenyls ND Tribromobiphenyls ND Tetrabromobiphenyls ND Pentabromobiphenyls ND Hexabromobiphenyls ND Heptabromobiphenyls ND Octabromobiphenyls ND Nonabromobiphenyls ND Decabromobiphenyl ND Sum of PBBBs ND 1000 4. Fire Fighting Measures: Flammable Properties: Flash point: Not applicable Combustible: Material may burn on contact with oxidizers or ignition sources Flammable Limits: Lower flammable limits: Not applicable Upper flammable limits: Not applicable Auto ignition temperature: Typically, 400°F - 500°F Explosion Hazard: Airborne concentrations of combustible dust, when combined with an ignition source, can cause an explosion hazard if the dust concentration exceeds 30-60 g/m3 Hazardous Combustion Products: Carbon dioxide, carbon monoxide, nitrogen oxides, aldehydes, cyanides and other hazardous gases, vapours and particles Extinguishing Media: Water, dry chemical and other agents rated for a wood fire (type A fire). Use an extinguisher rated for a Type A fire. Fire Fighting Instructions: Evacuate the area and notify the fire department. If possible, isolate the fire by moving other combustible materials. If the fire is small, use a hose-line or extinguisher rated for a Type A fire. If possible, dike and collect water used to fight fires. Fire fighters should wear normal protective equipment (full bunker gear) and positive pressure self-contained breathing apparatus. 5. Accidental Release Measures: Not Applicable 6. Handling and Storage: Handling: Provide ventilation or other measures so that dust levels are below the exposure limits listed in Storage: Keep dust away from ignition sources and store in a closed container. Consult NFPA 68 & 70 for