STL-1260-XXX

Hazard statements (CLP)

H302, H317, H351, H361, H372, H410

Code

Statements

H302

Harmful if swallowed

2.1 Classification of the substance or mixture

Health: Acute Toxicity (Oral), Category 4 Skin Sensitization, Category 1 Carcinogenicity, Category 2 Reproductive Toxicity, Category 2 Target Organ Toxicity (Repeated exposure), Category 1 Environmental: Acute Hazards to the Aquatic Environment, Category 1 Chronic Hazards to the Aquatic Environment, Category 1

2.2 Label elements

Exclamation

Environmental hazards

mark

Signal word

DANGER

Hazard statements

H302: Harmful if swallowed. H317: May cause an allergic skin reaction. H351: Suspected of causing cancer. H361: Suspected of damaging fertility or the unborn child. H372: Causes damage to organs through prolonged or repeated exposure. H410: Very toxic to aquatic life with long lasting effects.

Prevention

P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe fumes or vapours. P264: Wash exposed skin thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P272: Contaminated work clothing should not be allowed out of the workplace. P273: Avoid release to the environment. P280: Wear protective gloves, clothing, eye protection and face protection.

Response

P308+P313 IF exposed or concerned Get medical attention P330: Rinse mouth. P302+P352 IF ON SKIN Wash with plenty of soap and water P362+P364: Take off contaminated clothing and wash it before reuse. P391: Collect spillage.

Disposal

P501: Dispose of container in accordance with local, regional and national regulations. EMERGENCY OVERVIEW IMMEDIATE CONCERNS: Warning! This product contains: Nickel: May cause skin irritation, dermatitis or sensitization. Prolonged or repeated inhalation may be harmful. Under special conditions nickel can react with carbon monoxide in a reducing atmosphere to form nickel carbonyl Ni(CO)4, an extremely toxic gas. Fumes from the soldering/brazing process may be irritating to the eyes and respiratory system. Hot metal can cause eye and skin burns. Avoid breathing fumes from the soldering/brazing process. Use only with adequate ventilation. ROUTES OF ENTRY Potential routes of entry include eye contact, skin contact, inhalation of metallic fume and decomposition products from heating this material during the soldering/brazing process.