Note: Ingredients listed on restricted chemical lists
EC/CAS
91-20-3
Name of the chemical
Naphthalene,3
Concentration
<1
General Information
Revision date
2020-06-07
Product name
Power Mix 500 ULSD Fuel Treatment
Product Synonyms
None
1.2.1 Relevant identified uses
Additive
Icons in SDS
Company Information
company name
FRONTIER PERFORMANCE LUBRICANTS INC
GHS Information
Signal word
Danger!
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Liquid. Slight petroleum odor. Aspiration Hazard, Category 1 Combustible, Category 3 Acute Toxicity (Inhalation-dust and mist), Category 4 Carcinogenicity, Category 2 Serious Eye Damage/Eye Irritation, Category 2A Aquatic hazard, category 2
Most important adverse effects
This material is considered hazardous by the
Signal word
Danger!
Hazard statements
Combustible Liquid Harmful if inhaled. Causes skin irritation. Causes serious eye irritation. Suspected of causing cancer. May cause respiratory irritation.
Prevention
Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Wear protective gloves/protective clothing/eye protection/face protection. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wash thoroughly after handling. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Avoid release to the environment.
Response
If inhaled remove person to fresh air and keep comfortable for breathing. If in eyes Rinse cautiously with water or several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists Get medical advice/attention. If on skin Wash with plenty of water. If skin irritation occurs: get medical advice/attention. I SWALLOWED: Immediately call a poison center/doctor. Do not induce vomiting. Call a poison center/doctor if you feel unwell. Take off contaminated clothing. In case of fire: Use CO2, dry chemical or foam for extinction. Water can be used to cool and protect exposed material. Collect spillage.
Storage
Store locked up. Dispose of contents/container according to local, state and federal regulations. Store in cool/well ventilated place. Keep Cool
Disposal
Dispose of contents/containers in accordance with local and national regulations.