Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
5-20
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
5-20
EC/CAS
6846-50-0
Name of the chemical
2,2,4-trimethyl-1,3-pentanediol diisobutyrate
Concentration
5 - 20
EC/CAS
91-20-3
Name of the chemical
Naphthalene,3
Concentration
<0.15
EC/CAS
872-50-4
Name of the chemical
N-Methyl-2-Pyrrolidone; 1-methyl-2-pyrrolidone (NMP)
Concentration
<0.15
General Information
Revision date
2023-02-07
Product name
Dyna-Cast 20 Gray Part A
1.2.1 Relevant identified uses
Fast-Cast Urethane Isocyanate Resin – For Professional Use Only
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
Freeman Manufacturing & Supply Company
e-mail address of the competent person responsible for the Safety Data Sheet
contactus@freemansupply.com
GHS Information
Signal word
Danger
Section 2
OSHA HCS Classification
Flammable liquid, Category 4 Respiratory sensitization, Category 1 Skin sensitization, Category 1 Skin irritation, Category 2 Eye irritation, Category 2B Acute toxicity (Inhalation), Category 4 Specific target organ toxicity, single exposure Category 3 (Respiratory System) Carcinogenicity, Category 2 Reproductive toxicity, Category 2
2.2 Label elements
Danger
Hazard statements
Combustible liquid. Causes skin irritation May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May damage fertility or the unborn child.
Prevention
Avoid breathing dust/fume/gas/mist/vapours/spray Wear protective gloves/eye protection/face protection. Use only outdoors or in a well-ventilated area. In case of inadequate ventilation wear respiratory protection Wash skin and face thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product.
Response
If on skin Remove contaminated clothing. Wash skin with soap and water. If skin irritation or rash occurs get medical attention. If inhaled: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms get medical attention. If in eyes: Rinse continuously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. If swallowed: Immediately call a poison center and seek medical attention.
Storage
Store in a well-ventilated place. Keep cool. Keep container tightly closed
Disposal
Dispose of contents and container to an appropriate waste site in accordance with local and national regulations.
2.3 Other hazards
None known