Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
15 - 30
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
5 - 15
EC/CAS
872-50-4
Name of the chemical
N-Methyl-2-Pyrrolidone; 1-methyl-2-pyrrolidone (NMP)
Concentration
<0.1
EC/CAS
98-82-8
Name of the chemical
Cumol (2022/692)
Concentration
<0.01
General Information
Revision date
2018-08-17
Product name
Pro-Cast 132 Resin Part A
1.2.1 Relevant identified uses
Fast-Cast Polyurethane Isocyanate Component R 1
Icons in SDS
Company Information
company name
Freeman Manufacturing and Supply Company
GHS Information
Signal word
Danger
Section 2
OSHA HCS Classification
Skin irritation, Category 2 Skin sensitization, Category 1 Eye irritation, Category 2B Respiratory sensitization, Category 1 Acute toxicity (Inhalation), Category 4 Specific target organ toxicity, repeated exposure Category 1 (Respiratory Tract) Specific target organ toxicity, single exposure Category 3 (Respiratory System) Aspiration hazard, Category 1 Chronic Aquatic Toxicity, Category 4
Signal word
Danger
Hazard statements
Harmful if inhaled. May cause respiratory irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause damage to organs (Respiratory) through prolonged or repeated exposure if inhaled. Causes skin and eye irritation. May cause an allergic skin reaction. May be fatal if swallowed and enters airways. Toxic to aquatic life with long lasting effects.
Prevention
Do not breathe mist, vapors or spray. Section 2 Hazard Identification continued Wear protective gloves/eye protection/face protection. In case of inadequate ventilation wear respiratory protection Wash skin and face thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid release to the environment.
Response
If on skin: Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs get medical attention. If inhaled: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms get medical attention. If in eyes: Rinse continuously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists get medical attention. If swallowed: Immediately call a poison center and seek medical attention.
Storage
Store in a well-ventilated place. Keep container tightly closed.
Disposal
Dispose of contents and container to an appropriate waste site in accordance with local and national regulations.
2.3 Other hazards
None known
