Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
8052-41-3
Name of the chemical
Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy
Concentration
N/A
EC/CAS
872-50-4
Name of the chemical
N-Methyl-2-Pyrrolidone; 1-methyl-2-pyrrolidone (NMP)
Concentration
N/A
General Information
Revision date
2018-07-25
Product name
Master Dyna-Cast Part A
1.2.1 Relevant identified uses
Fast-Cast Urethane Isocyanate Resin R 1
Icons in SDS
Company Information
company name
Freeman Manufacturing and Supply Company
GHS Information
Signal word
Danger
Section 2
OSHA HCS Classification
Acute toxicity (Inhalation) Category 4 Specific target organ toxicity - single exposure: Category 3 (Respiratory system) Respiratory sensitization: Category 1 Specific target organ toxicity - repeated exposure: Category 1 (Respiratory Tract) Skin irritation: Category 2 Skin sensitization: Category 1 Eye irritation: Category 2B Flammable Liquid Category 3
Signal word
Danger
Hazard statements
Combustible liquid. Harmful if inhaled. May cause respiratory irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Causes damage to organs (Respiratory Tract) through prolonged or repeated exposure if inhaled. Causes skin irritation. May cause an allergic skin reaction. Causes eye irritation.
Prevention
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed when not in use. Wear protective gloves/ eye protection/ face protection. Identification continued Avoid breathing mist, vapors or spray. Do not eat, drink or smoke when using this product. Wash skin and face thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. In case of inadequate ventilation wear respiratory protection
Response
Get medical attention if you feel unwell. If on skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical attention. Wash contaminated clothing before reuse. If in eyes: Rinse continuously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. If inhaled: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Get medical attention.
Storage
Store in a well-ventilated place. Keep cool.
Disposal
Dispose of contents and container to an appropriate waste site in accordance with local and national regulations.
2.3 Other hazards
None known
