Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
50-75
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
25-50
EC/CAS
26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
3-7
General Information
Revision date
2021-10-15
Product name
Freeman 2450 Resin
1.2.1 Relevant identified uses
Rapid Set Casting, Prototyping
Icons in SDS
Company Information
company name
Freeman Manufacturing and Supply Company
GHS Information
Signal word
Danger
Section 2
OSHA HCS Classification
Acute Toxicity Inhalation, Category 4 Skin Irritation, Category 2 Eye Irritation, Category 2B Respiratory Sensitization, Category 1 Skin Sensitization, Category 1B Carcinogenicity, Category 2 Specific Target Organ Toxicity, Single Exposure, Category 3 Specific Target Organ Toxicity, Repeated Exposure, Category 2
Signal word
Danger
Hazard statements
Causes skin irritation May cause an allergic skin reaction. Causes eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapors/spray. Wash hands thoroughly after handling. Only use outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the work place. Wear protective gloves, clothing, and eye/face protection. In case of inadequate ventilation wear respiratory protection. Identification continued
Response
IF ON SKIN: Gently wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice/attention. Take off contaminated clothing and wash it before reuse. IF INHALED: Remove victim to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms, get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents and container to an appropriate waste site in accordance with local, regional, and national regulations.