GREENchoice Drywall Adhesive

SECTION 2: Hazards identification

29 CFR 1910.1200) Ingredient Exposure limits OSHA/HCS status No exposure limit value known. : While this material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200), this SDS contains valuable information critical to the Consult local authorities for acceptable exposure limits. safe handling and proper use of the product. This SDS should be retained and available for employees and other users of this product. Classification of the Appropriate engineering : Good general ventilation should be sufficient to control worker exposure to airborne : Not classified. substance or mixture controls contaminants. Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure

2.2 Label elements

controls they comply with the requirements of environmental protection legislation. In some Conditions to avoid : No specific data.

Signal word

No signal word. cases, fume scrubbers, filters or engineering modifications to the process equipment Incompatible materials : No signal word. : No specific data. Incompatible materials : No specific data.

Hazard statements

No known significant effects or critical hazards. will be necessary to reduce emissions to acceptable levels. Individual protection measures Hazardous decomposition

Precautionary statements

Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before General : Read label before use. Keep out of reach of children. If medical advice is needed, eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. have product container or label at hand. Hazards not otherwise : None known. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety classified showers are close to the workstation location. Date of issue/Date of revision : 11/11/2015. Version : 4.2 4/10 Date of issue/Date of revision : 11/11/2015. Version : 4.2 1/10 4/9 GREENchoice Drywall Adhesive Section 8: Exposure controls/personal protection Section 8. Exposure controls/personal protection Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless shields. the assessment indicates a higher degree of protection: safety glasses with side- Skin protection GREENchoice Drywall Adhesive Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is Section 1. Identification necessary. necessary. Body protection : Personal protective equipment for the body should be selected based on the task being

Product definition

GREENchoice Drywall Adhesive performed and the risks involved and should be approved by a specialist before Product type : Liquid. handling this product. CAS # Other skin protection : mixture : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a Address : Franklin International specialist before handling this product. 2020 Bruck Street Respiratory protection : Use a properly fitted, air-purifying or air-fed respirator complying with an approved Columbus OH 43207 standard if a risk assessment indicates this is necessary. Respirator selection must be Contact person : Franklin Technical Services based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Telephone : (800) 877-4583 In case of emergency Section 9: Physical and chemical properties Section 9. Physical and chemical properties : Franklin Security (614) 445-1300 Appearance Reference number : 3620 Physical state : Liquid. [Paste.] Product code Color : 7272 : Beige. Color : Beige. Date of issue/Date of revision Odor : 11/11/2015. : Not available. Print date Odor threshold : 11/12/2015. : Not available. Chemtrec (24 Hour) pH : (800) 424 - 9300 : 7 Chemtrec International Melting point : (703) 527 - 3887 : Not available. Chemical family Boiling point : 100°C (212°F) Adhesive. Flash point : Closed cup: >93.333°C (>200°F) [Setaflash.] Relevant identified uses of the substance or mixture and uses advised against Evaporation rate : <1 (butyl acetate = 1) Not applicable. VOC (less water, less : 33.18 g/l exempt solvents) Relative density : 1.44305 OSHA/HCS status : While this material is not considered hazardous by the OSHA Hazard Communication Section 10: Stability and reactivity Section 10. Stability and reactivity Standard (29 CFR 1910.1200), this SDS contains valuable information critical to the Reactivity : No specific test data related to reactivity available for this product or its ingredients. safe handling and proper use of the product. This SDS should be retained and available Reactivity : No specific test data related to reactivity available for this product or its ingredients. for employees and other users of this product. Chemical stability : The product is stable. Classification of the : Not classified. Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur. substance or mixture reactions