Note: Ingredients listed on restricted chemical lists
EC/CAS
7632-00-0
Name of the chemical
Sodium nitrite
Concentration
9-13%
General Information
Revision date
2014-09-11
Product name
FRAM Coolant Filter BTA +
1.2.1 Relevant identified uses
Cooling system filter for trucks
Manufacturer Name
US Office
Emergency telephone
1-800-424-9300
Icons in SDS
Company Information
company name
FRAM Group Operations LLC
GHS Information
Signal word
DANGER!
Hazard Codes
Hazard statements (CLP)
H272, H290, H302, H314, H335
Hazard statements
Code
Statements
H272
May intensify fire; oxidiser
Section 2
SECTION 2: Hazards identification
GHS/HAZCOM 2012 Classification This product is a manufactured article (truck coolant filter) containing solid pellets. The filter unit is sealed so no contact with the contents occurs during normal handling or use. No adverse effects are expected with normal handling of the metal filter. Contact with the pellets may cause adverse effects and are classified as follows Health Physical Acute Toxicity Category 4 Oxidizing Solid Category 2 Eye Corrosion Category 1 Metal Corrosive Skin Corrosion Category 1 Specific Target Organ Toxicity – Single Exposure Category 3
2.2 Label elements
DANGER! H272 May intensify fire; oxidizer H290 May be corrosive to metals H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage H335 May cause respiratory irritation.
Prevention
P210 Keep away from heat, sparks, open flames, hot surfaces. - No smoking. P220 Store away from clothing, and combustible materials. P221 Take any precaution to avoid mixing with combustibles. P234 Keep only in original container. P260 Do not breathe dust. P264 Wash exposed skin thoroughly after handling. P270 Do not eat, drink, or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves, protective clothing, eye protection, and face protection.
Response
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P312 Call a POISON CENTER or doctor if you feel unwell. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310 Immediately call a POISON CENTER or doctor. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER or doctor. P363 Wash contaminated clothing before reuse. P370 + P378 In case of fire: Use dry chemicals, CO2, water spray (fog), or foam to extinguish. P390 Absorb spillage to prevent material-damage.
Storage
P405 Store locked up. P406 Store in corrosive resistant container with a resistant inner liner.
Disposal
P501 Dispose of contents and container in accordance with local and national regulations.
2.1 Classification of the substance or mixture
This product is a manufactured article (truck coolant filter) containing solid pellets. The filter unit is sealed so no contact with the contents occurs during normal handling or use. No adverse effects are expected with normal handling of the metal filter. Contact with the pellets may cause adverse effects and are classified as follows: Health Physical Acute Toxicity Category 4 Oxidizing Solid Category 2 Eye Corrosion Category 1 Metal Corrosive Skin Corrosion Category 1 Specific Target Organ Toxicity – Single Exposure