RENDEROC PATCH

Fosroc Limited

Revision date : 2019-12-11

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS07
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

87-69-4

Name of the chemical

L-(+)-tartaric acid

Concentration

N/A

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

N/A

EC/CAS

238-878-4

Name of the chemical

Quarz-A-Staub (s. u. TRGS 906)

Concentration

N/A

General Information

Revision date

2019-12-11

Product name

RENDEROC PATCH

1.2.1 Relevant identified uses

Cementitious repair compound

supplier name

Fosroc Limited

Emergency telephone

+44 (0) 1827 265 279 (Monday-Sunday 24 hours a day

Icons in SDS

Company Information

company name

Fosroc Limited

e-mail address of the competent person responsible for the Safety Data Sheet

enquiryuk@fosroc.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H315, H317, H318, H335

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

Physical hazards

Not Classified

Health hazards

Skin Irrit. 2 - H315 Eye Dam. 1 - H318 Skin Sens. 1 - H317 STOT SE 3 - H335

Environmental hazards

Not Classified Human health Dust or splashes from the mixture may cause permanent eye damage. Dust may irritate the respiratory system. Symptoms following overexposure may include the following: Coughing. Dust has an irritating effect on moist skin. Prolonged contact with moist or wet product may cause burns. Frequent inhalation of dust over a long period of time increases the risk of developing lung diseases. Environmental The product will harden into a solid mass in contact with water and moisture. The resultant material is not biodegradable.

Signal word

Danger

Hazard statements

H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. P264 Wash contaminated skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P302+P352 IF ON SKIN: Wash with plenty of water. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310 Immediately call a POISON CENTER/ doctor. P312 Call a POISON CENTRE/doctor if you feel unwell. P321 Specific treatment (see medical advice on this label). P332+P313 If skin irritation occurs: Get medical advice/ attention. P333+P313 If skin irritation or rash occurs: Get medical advice/ attention. P362+P364 Take off contaminated clothing and wash it before reuse. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.

Precautionary statements

P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P501 Dispose of contents/ container in accordance with national regulations.

Contains

ORDINARY PORTLAND CEMENT, CALCIUM SULPHO-ALUMINATE CEMENT

Supplemental label elements

P261 Avoid breathing vapour/ spray

2.3 Other hazards

This substance is not classified as PBT or vPvB according to current EU criteria.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.