Note: Ingredients listed on restricted chemical lists
EC/CAS
80-62-6
Name of the chemical
methacrylic acid, methyl ester
Concentration
N/A
EC/CAS
103-11-7
Name of the chemical
acrylic acid, 2-ethylhexyl ester
Concentration
N/A
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
N/A
General Information
Revision date
2018-01-18
Product name
NITODEK FS WEARCOAT RESIN
Chemical name
Polyurethane Resin
supplier name
FOSROC Limited
Icons in SDS
Company Information
company name
FOSROC Limited
e-mail address of the competent person responsible for the Safety Data Sheet
enquiryuk@fosroc.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H315, H317, H335
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
Physical hazards
Flam. Liq. 2 - H225
Health hazards
Skin Irrit. 2 - H315 Skin Sens. 1 - H317 STOT SE 3 - H335
Environmental hazards
Not Classified Human health The product contains a sensitising substance. May cause sensitisation or allergic reactions in sensitive individuals. Physicochemical The product is highly flammable. Vapours may form explosive mixtures with air.
Signal word
Danger
Hazard statements
H225 Highly flammable liquid and vapour. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P312 Call a POISON CENTRE/doctor if you feel unwell. P321 Specific treatment (see medical advice on this label). P332+P313 If skin irritation occurs: Get medical advice/ attention. P333+P313 If skin irritation or rash occurs: Get medical advice/ attention. P362+P364 Take off contaminated clothing and wash it before reuse. P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Precautionary statements
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261 Avoid breathing vapour/ spray. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P403+P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents/ container in accordance with national regulations.
Contains
METHYL METHACRYLATE, 2-ETHYLHEXYL ACRYLATE, Reaction product: Bisphenol-A- (epichlorhydrin) Epoxy Resin
Supplemental label elements
P264 Wash contaminated skin thoroughly after handling
2.3 Other hazards
This product does not contain any substances classified as PBT or vPvB.
