Note: Ingredients listed on restricted chemical lists
EC/CAS
205-500-4/141-78-6
Name of the chemical
acetic acid, ethyl ester
Concentration
1-<5
General Information
Revision date
2022-06-14
Product name
Primer H-TB
supplier name
Ford-Werke GmbH
Emergency telephone
+49 (0) 6132-84463 (GBK GmbH – 24/7
Icons in SDS
Company Information
company name
Ford-Werke GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
sdseu@ford.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H315, H317, H319, H334, H336, H373
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
EU Classification
Chemicals (Health and Safety) and Genetically Modified Organisms (Contained Use) (Amendment etc.) (EU Exit) Regulations
Physical hazards
Flammable liquids, Category 2 H225 Highly flammable liquid and vapour.
Health hazards
Skin corrosion/irritation, Category 2 H315 Causes skin irritation. Serious eye damage/eye irritation, H319 Causes serious eye irritation. Category 2 Respiratory sensitisation, Category 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin sensitisation, Category 1 H317 May cause an allergic skin reaction. Specific target organ toxicity – Single H336 May cause drowsiness or dizziness. exposure, Category 3, Narcosis Specific target organ toxicity – H373 May cause damage to organs through Repeated exposure, Category 2 prolonged or repeated exposure. Full text of H- and EUH-statements: see section 16
Adverse physicochemical, human health and environmental effects
No additional information available
2.2 Label elements
Labelling according to The Chemicals (Health and Safety) and Genetically Modified Organisms (Contained Use) (Amendment etc.) (EU Exit) Regulations
Signal word
Danger
Contains
1,3-Benzenedicarboxylic acid, polymer with 1,4-benzenedicarboxylic acid, 1,6- diisocyanatohexane, 2,2-dimethyl-1,3-propanediol and 1,3-ethandiol, Benzene, 1,3- diisocyanatomethyl-, homopolymer, Benzene, 2,4-diisocyanato-1-methyl-, homopolymer, 4- isocyanatosulphonyltoluene
Hazard statements
H225 Highly flammable liquid and vapour. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H336 May cause drowsiness or dizziness. H373 May cause damage to organs through prolonged or repeated exposure.
Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260 Do not breathe fume, gas, mist, spray, vapours. P280 Wear protective clothing, eye protection, face protection, protective gloves.
Response
P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER, doctor. P370+P378 In case of fire: Use D-powder, carbon dioxide (CO2), foam to extinguish.
Storage
P403+P235 Store in a well-ventilated place. Keep cool.
Additional information
As from 24 August 2023 adequate training is required before industrial or professional use.
Other hazards which do not result in classification
Gas/vapour heavier than air. May accumulate in confined spaces, particularly at or below ground level. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. This substance/mixture does not meet the PBT criteria of REACH regulation, annex XIII. This substance/mixture does not meet the vPvB criteria of REACH regulation, annex XIII. The mixture does not contain substance(s) included in the list established in accordance with Article 59(1) of REACH for having endocrine disrupting properties, or is not identified as having endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at a concentration equal to or greater than 0,1 %