Note: Ingredients listed on restricted chemical lists
EC/CAS
200-662-2/67-64-1
Name of the chemical
acetone
Concentration
20 to 60%
EC/CAS
200-661-7/67-63-0
Name of the chemical
Propan-2-ol
Concentration
<20%
EC/CAS
204-658-1/123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
<10%
EC/CAS
265-185-4/64742-82-1
Name of the chemical
Naphtha (petroleum), hydrodesulfurized heavy
Concentration
<10%
EC/CAS
200-578-6/64-17-5
Name of the chemical
Ethanol
Concentration
<5%
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
<2.5%
General Information
Version
1.1
Revision date
2024-10-10
Product name
FORCH PAINT 400 ML (ALL COLOURS)
Product Synonyms
BLACK HIGH GLOSS R9005 (ART 6210 2502) ● BLACK MATT R9005
1.2.1 Relevant identified uses
AEROSOL DISPENSED ● PAINT ● SPRAY PAINT
supplier name
FORCH AUSTRALIA PTY LTD
Icons in SDS
Company Information
company name
FORCH AUSTRALIA PTY LTD
e-mail address of the competent person responsible for the Safety Data Sheet
shop@forch.com.au
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H222, H229, H315, H319, H336
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture
Physical hazards
Aerosols - Flammable: Category 1 Aerosols - Pressurised: Category 1
Health hazards
Skin Corrosion/Irritation: Category 2 Serious Eye Damage / Eye Irritation: Category 2A Specific Target Organ Toxicity (Single Exposure): Category 3 (Narcotic Effects) Repeated exposure may cause skin dryness or cracking
Environmental hazards
Not classified as an Environmental Hazard
Signal word
DANGER
Hazard statements
AUH066 Repeated exposure may cause skin dryness or cracking. H222 Extremely flammable aerosol. H229 Pressurized container: may burst if heated. H315 Causes skin irritation. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness.
Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P264 Wash thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/protective clothing/eye protection/face protection.
Response
P302 + P352 IF ON SKIN: Wash with plenty of water. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P321 Specific treatment is advised - see first aid instructions. P332 + P313 If skin irritation occurs: Get medical advice/ attention. P362 + P364 Take off contaminated clothing and wash it before reuse.
Storage
P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C.
Disposal
None allocated
Other hazards
No information provided
2.1 Classification of the substance or mixture
CLASSIFIED AS HAZARDOUS ACCORDING TO SAFE WORK AUSTRALIA CRITERIA Physical Hazards Aerosols - Flammable: Category 1 Aerosols - Pressurised: Category 1 Health Hazards Skin Corrosion/Irritation: Category 2 Serious Eye Damage / Eye Irritation: Category 2A Specific Target Organ Toxicity (Single Exposure): Category 3 (Narcotic Effects) Repeated exposure may cause skin dryness or cracking. Environmental Hazards Not classified as an Environmental Hazard
