Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
20-85%
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
0-20% 1-10%
General Information
Revision date
2014-10-30
Product name
PF Concrete Pre-mixed concrete
Product Synonyms
Ready-mixed concrete, grout, mortar
1.2.1 Relevant identified uses
A wide variety of building and construction applications IMPORTANT NOTICE: This Safety Data Sheet (SDS) is issued by PF Formation, in accordance with the Work Health and Safety (WHS) Regulations. As such, the information in it must not be altered, deleted or added to. PF Formation will not accept any responsibility for any changes made to its SDS by any other person or organisation
Icons in SDS
Company Information
company name
for PF Formation Pre-mixed Concrete
Section 2
SECTION 2: Hazards identification
This product is classified as hazardous according to the criteria of the National Occupational Health and Safety Commission (NOHSC) Risk Phases: R48/20 Harmful: danger of serious damage to health by prolonged exposure through inhalation R43 May cause sensitisation by skin contact. R21/22 Harmful in contact with skin and if swallowed. R36/38 Irritating to eyes and skin. Safety Phases: S22 Do not breathe dust. S24/25 Avoid contact with skin and eyes. After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of S27/28 water. S29 Do not empty into drains. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. PROGRAM No. VERSION APPROVED PROGRAM NAME PAGE No Date / Revised: 1 V2 Joshua Graham SDS for Pre-Mix Concrete 1
