Note: Ingredients listed on restricted chemical lists
EC/CAS
212-485-8/822-06-0
Name of the chemical
Hexamethylene diisocyanate
Concentration
0.1-1.0
EC/CAS
204-658-1/123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
2.5-10
EC/CAS
9046-01-9
Name of the chemical
polyethyleneglycol tridecyl ether phosphate
Concentration
2.5-10
General Information
Revision date
2017-01-19
Product name
FLOWSEAL PU ANTI-STAIN HARDENER
1.2.1 Relevant identified uses
matrix. Hardener for 2 components coatings - Industrial use For use by appropriately trained applicators. Roller application or brushing. Low energy spreading of coatings
1.2.2. Uses advised against
Home DIY applications, because of the health hazards and training required
supplier name
Flowcrete UK Ltd
Emergency telephone
+001 703 5273887 (Outside US
Icons in SDS
Company Information
company name
Flowcrete UK Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
ehs.uk@flowcrete.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H412
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
EU Classification
Classification, Labeling & Packaging Regulation (EC) 1272/2008
Hazard statements
Other EU extensions EUH204 Skin Irritation, category 2 H315 Skin Sensitizer, category 1 H317 Eye Irritation, category 2 H319 Acute Toxicity, Inhalation, category 4 H332 Respiratory Sensitizer, category 1 H334 STOT, single exposure, category 3, RTI H335 Hazardous to the aquatic environment, Chronic, category 3 H412 Other EU extensions EUH204 Contains isocyanates. May produce an allergic reaction. Skin Irritation, category 2 H315 Causes skin irritation. Skin Sensitizer, category 1 H317 May cause an allergic skin reaction. Eye Irritation, category 2 H319 Causes serious eye irritation. Acute Toxicity, Inhalation, category 4 H332 Harmful if inhaled. Respiratory Sensitizer, category 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. STOT, single exposure, category 3, RTI H335 May cause respiratory irritation. Hazardous to the aquatic environment, H412 Harmful to aquatic life with long lasting effects. Chronic, category 3
2.2 Label elements
Symbol(s) of Product
Signal word
Danger Named Chemicals on Label Hexamethylene diisocyanate, Hexamethylene-1,6-diisocyanate homopolymer, cyclohexane,5-isocyanato-1-(is, Hydrophilic aliphatic polyisocyanate
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/ face protection. P285 In case of inadequate ventilation wear respiratory protection. P302+352 IF ON SKIN: Wash with plenty of soap and water. P304+340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. P333+313 If skin irritation or rash occurs: Get medical advice/attention. P341 If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P342+311 If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
2.3 Other hazards
No Information
Results of PBT and vPvB assessment
The product does not meet the criteria for PBT/VPvB in accordance with Annex XIII.
