Note: Ingredients listed on restricted chemical lists
EC/CAS
100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
N/A
EC/CAS
202-851-5
Name of the chemical
Styrol (605/2014)
Concentration
N/A
General Information
Revision date
2014-03-02
Product name
Flowchem VE Resin (all resins)
CAS No.
100-42-5
1.2.1 Relevant identified uses
Epoxy vinyl ester resin, component of a multi-pack coating system Mixed product is applied by roller and/or spray
Manufacturer Name
Flowcrete SA (Pty) Ltd
Icons in SDS
Company Information
company name
Flowcrete SA (Pty) Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
southafrica@flowcrete.com
Section 2
SECTION 2: Hazards identification
Flammable. Harmful by inhalation. Irritating to eyes and skin. Vapours can build explosive mixtures in air. Explosion risk with heating to temperatures above 50 oC. When the base is mixed with the hardener a very exothermic reaction starts (i.e. much heat is generated). The product should be applied immediately after mixing. If the mix is not applied within 10 - 20 minutes copious amounts of acrid smoke will be generated.
