Flo-Poxy 100% Solids Epoxy Moisture Vapor Barrier - Part B

Florida Paints & Coatings, LLC

Revision date : 2023-12-14

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS08 GHS07
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

100-51-6

Name of the chemical

Benzyl Alcohol

Concentration

1-5

EC/CAS

111-40-0

Name of the chemical

2,2'-iminodi(ethylamine)

Concentration

1-5

EC/CAS

107-15-3

Name of the chemical

Ethylenediamine

Concentration

1-5

General Information

Revision date

2023-12-14

Product name

Flo-Poxy 100% Solids Epoxy Moisture Vapor Barrier - Part B

1.2.1 Relevant identified uses

Moisture vapor barrier epoxy coating

Emergency telephone

1.800.255.3924

Icons in SDS

GHS05 GHS07 GHS08 M004 M009 M010 M011 M017

Company Information

company name

Florida Paints & Coatings, LLC

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H314, H317, H332, H334

Hazard statements

Code

Statements

H314

Causes severe skin burns and eye damage

Section 2

SECTION 2: Hazards identification

Appearance Amber liquid Physical state Liquid Classification Acute toxicity - Inhalation (Dusts/Mists) Category 4 Skin corrosion/irritation Category 1 Sub-category B Serious eye damage/eye irritation Category 1 Respiratory sensitization Category 1 Skin sensitization Category 1

Signal word

Danger Hazard statements Harmful if inhaled Causes severe skin burns and eye damage May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction Precautionary Statements - Prevention Use only outdoors or in a well-ventilated area Do not breathe dust/fume/gas/mist/vapors/spray Wash face, hands and any exposed skin thoroughly after handling Wear protective gloves/protective clothing/eye protection/face protection In case of inadequate ventilation wear respiratory protection Contaminated work clothing must not be allowed out of the workplace Precautionary Statements - Response Immediately call a poison center or doctor/physician IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Immediately call a poison center or doctor/physician IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower Wash contaminated clothing before reuse If skin irritation or rash occurs: Get medical advice/attention IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing Immediately call a poison center or doctor/physician IF SWALLOWED: Rinse mouth. Do NOT induce vomiting Precautionary Statements - Storage Store locked up

Precautionary statements

Disposal Dispose of contents/container to an approved waste disposal plant

2.3 Other hazards

Harmful to aquatic life with long lasting effects

2.1 Classification of the substance or mixture

Acute toxicity - Inhalation (Dusts/Mists) Category 4 Skin corrosion/irritation Category 1 Sub-category B Serious eye damage/eye irritation Category 1 Respiratory sensitization Category 1 Skin sensitization Category 1 Signal Word Danger Hazard statements Harmful if inhaled Causes severe skin burns and eye damage May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.