Spiral Wound Gasket (please see appendix I for the range of products covered by this Safety Data Sheet

Flexitallic Ltd

Revision date : 2014-09-01

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating
Safety risk rating
Environmental risk rating

General Information

Revision date

2014-09-01

Product name

Spiral Wound Gasket (please see appendix I for the range of products covered by this Safety Data Sheet

1.2.1 Relevant identified uses

Flange sealing

Icons in SDS

Company Information

company name

Flexitallic Ltd

e-mail address of the competent person responsible for the Safety Data Sheet

enquiries@flexitallic.eu

Section 2

SECTION 2: Hazards identification

Classification of items within the product Although several of the constituent parts used in the manufacture of spiral wound gaskets may be hazardous in the raw state, the manufacturing process results in a solid infusible form, binding or otherwise rendering them inert. Although these constituent parts do not come within the scope of the REACH regulations they are identified in the table below for information purposes only. Fumes and dust from these constituent parts can be released by overheating, machining or abrading the product Constituent Part CAS Number % Exposure Limit US Other Exposure Limits Nickel 7440-02-0 10 mg/m3 mg/m3 Chromium 7440-47-3 15 mg/m3 Molybdenum 7439-98-7 mg/m3 Silica (Quartz) 14808-60-7 mg/m3 (respirable) mg/m3 Graphite 7782-4205 95 mg/m3 (respirable) mg/m3

2.2 Label elements

- not applicable to these products

2.3 Other hazards

– although substances used in the manufacture of this sheet material can, prior to production, present hazards from ingestion etc. – when contained within this finished product they do not present a hazard in any form nor can they be released. 3.0 Information on ingredients. 3.1 Ingredients within the mix used to produce this sheet are listed in section 2.1 of this document.

2.1 Classification of the substance or mixture

Although several of the constituent parts used in the manufacture of spiral wound gaskets may be hazardous in the raw state, the manufacturing process results in a solid infusible form, binding or otherwise rendering them inert. Although these constituent parts do not come within the scope of the REACH regulations they are identified in the table below for information purposes only. Fumes and dust from these constituent parts can be released by overheating, machining or abrading the product. Constituent Part CAS Number % Exposure Limit US Other Exposure Limits Nickel 7440-02-0 <10 1 mg/m3 0.5 mg/m3 Chromium 7440-47-3 <15 0.5 mg/m3 Molybdenum 7439-98-7 <3 10 mg/m3 Silica (Quartz) 14808-60-7 <2 0.1 mg/m3 (respirable) 0.1 mg/m3 Graphite 7782-4205 <95 2.5 mg/m3 (respirable) 10 mg/m3 1 2.2 Label Elements - not applicable to these products. 2.3 Other hazard information: – although substances used in the manufacture of this sheet material

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.