Electrically Conductive Sealant / Base compound Part-A

Hazard statements (CLP)

H304, H315, H319, H351, H361d, H413

Code

Statements

H304

May be fatal if swallowed and enters airways

Aspiration hazard

CATEGORY 1 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 2A CARCINOGENICITY - Category 2 TOXIC TO REPRODUCTION (UNBORN CHILD) - Category 2 AQUATIC, CHRONIC - CATEGORY 4 GHS LABEL REQUIREMENTS

Signal word

DANGER

Hazard statements

MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS - (H304) CAUSES SERIOUS EYE IRRITATION - (H319) CAUSES SKIN IRRITATION - (H315) SUSPECTED OF DAMAGING THE UNBORN CHILD - (H361d) SUSPECTED OF CAUSING CANCER - (H351) MAY FORM COMBUSTIBLE DUST CONCENTRATIONS IN AIR (WHEN GRINDING OR ABRADING) MAY CAUSE LONG LASTING HARMFUL EFFECTS TO AQUATIC LIFE - H413

Precautionary statements

P101+P102+P103: If medical advice is needed, have product container or label at hand. Keep out of reach of children. • Read label before use • P202: Do not handle until all safety precautions have been read and understood • P210: Keep away from heat/sparks/open flames and hot surfaces-No Smoking • P240:Ground/bond container and receiving equipment • P261+P262+P263+P264:Avoid breathing dust/fumes/gas/mist/vapours/spray.Do not get in eyes , on skin, or on clothing. Avoid contact during pregnancy/while nursing. Wash thoroughly after handling. • P270+P271+P273: Do not eat drink or smoke when using this product. Use only outdoors or in a well ventilated area. Avoid release to the environment. • P281+P280: Use personal protective equipment as required. Wear protective gloves/ protective clothing/ eye protection/face protection • P301+P310+P331 If swallowed Immediately call a POISON CENTER or doctor/physician. Do not induce vomiting • P305+P351+P338+P315 If in eyes Rinse cautiously with water for several minutes. Remove contact lenses,if present and easy to do. Continue rinsing. Get immediate medical advice/attention. • P304+P340+P314 If inhaled Remove victim to fresh air and keep at rest in a position comfortable for breathing Get medical advice/attention if you feel unwell • P342+P340+P315 If experiencing respiratory symptoms Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get immediate medical advice/attention. • P302+P352 If on skin (or in hair) Wash with plenty of soap and water. If skin irritation occurs seek medical attention • P306+P361 If on clothing Remove/ take off immediately all contaminated clothing • P402+P403+P404: Store in a dry place. Store in a well ventilated space. Store in a closed container. • P233+P234+P235: Keep container tightly closed. Keep only in original container. Keep cool.

Supplemental label elements

Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of concentrations above recommended limits causes headaches, drowsiness and nausea and could lead to unconsciousness or possibly death. 1-component mixtures: formaldehyde is released during the curing phase. Formaldehyde may cause irreversible effects, is irritating to the mucous membranes and may cause the skin to become sensitized. Avoid any contact with skin or clothing and wash thoroughly after handling. Emits toxic fumes when heated. Sanding and grinding dust may be harmful if inhaled. Sanding and grinding dust may form combustible concentrations in air. This sds is provided without any warranty expressed or implied regarding its correctness or suitability for specific situations.

2.3 Other hazards

Prolonged or repeated exposure may dry skin and / or cause skin irritation.