Note: Ingredients listed on restricted chemical lists
EC/CAS
26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (MDI)
Concentration
40-<50%
General Information
Revision date
2023-07-13
Product name
10624065 - FIX-R PU Insulation Bonding Adhesive 5L
1.2.1 Relevant identified uses
Adhesive. For professional users only
1.2.2. Uses advised against
All uses not specified in this section or in section 7.3
Emergency telephone
+44 (0) 1274 696979
Icons in SDS
Company Information
company name
FIX-R
e-mail address of the competent person responsible for the Safety Data Sheet
sigassured@sigplc.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
GB CLP Regulation (UK S.I. 2019/720 and UK S.I. 2020/1567): Classification of this product has been carried out in accordance with GB CLP Regulation (UK S.I. 2019/720 and UK S.I. 2020/1567). Carc. 2: Carcinogenicity, Category 2, H351 Eye Irrit. 2: Eye irritation, Category 2, H319 Resp. Sens. 1: Sensitisation, respiratory, Category 1, H334 Skin Irrit. 2: Skin irritation, Category 2, H315 Skin Sens. 1: Sensitisation, skin, Category 1, H317 STOT RE 2: Specific target organ toxicity, repeated exposure, Category 2, H373 STOT SE 3: Respiratory tract toxicity, single exposure, Category 3, H335
2.2 Label elements
GB CLP Regulation (UK S.I. 2019/720 and UK S.I. 2020/1567): Danger
Hazard statements
Carc. 2: H351 - Suspected of causing cancer. Eye Irrit. 2: H319 - Causes serious eye irritation. Resp. Sens. 1: H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin Irrit. 2: H315 - Causes skin irritation. Skin Sens. 1: H317 - May cause an allergic skin reaction. STOT RE 2: H373 - May cause damage to organs through prolonged or repeated exposure. STOT SE 3: H335 - May cause respiratory irritation.
Precautionary statements
SECTION 2: HAZARDS IDENTIFICATION (continued) P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe vapours P261: Avoid breathing vapours P264: Wash thoroughly after use. P271: Use only outdoors or in a well-ventilated area. P272: Contaminated work clothing should not be allowed out of the workplace. P280: Wear protective gloves/face protection/protective clothing/respiratory protection/protective footwear. P284: Wear respiratory protection. P302+P352 IF ON SKIN Wash with plenty of soap and water P304+P340 IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned Get medical advice/attention P312: Call a POISON CENTER or doctor/physician if you feel unwell. P314: Get medical advice/attention if you feel unwell. P333+P313 If skin irritation or rash occurs Get medical advice/attention P337+P313 If eye irritation persists Get medical advice/attention P342+P311 If experiencing respiratory symptoms Call a POISON CENTER or doctor/physician P403+P233: Store in a well-ventilated place. Keep container tightly closed. P501: Dispose of the contents and/or its container in line with regulations on dangerous waste or packaging and waste packaging respectively.
Supplemental label elements
EUH204: Contains isocyanates. May produce an allergic reaction.
Hazardous Ingredients
Methylenediphenyl diisocyanate (CAS: 26447-40-5)
Additional information
As from 24 August 2023 adequate training is required before industrial or professional use. RCH004a Persons already sensitised to diisocyanates may develop allergic reactions when using this product. RCH004b Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. RCH004c This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.
2.3 Other hazards
Product does not meet PBT/vPvB criteria