LUBRIPLATE Air Tool Lubricant

Acute Health Hazards

Threshold Limit Value PEL for Ortho-dichlorobenzene: C-300mg/m? TLV for oil mist = Smg/m? Effects of Overexposure Prolonged or repeated skin contact may cause skin irritation. Product contacting the eyes may cause eye irritation. Human health risks vary from person to person. As a precaution, exposure to liquids, vapors, mtists and fumes should be minimized. This product has a low order of acute oral toxicity, It is reported that ODCB can cause liver damage in test animals. Carcinogenicity: NTP? No IARC Monographs? No

Appearance/Odor

Amber oil with sweet odor. Secction 7 - Renctivity Data Stability Unstable Conditions te Avoid N/A Stable X Incompatibility (Materials to Avoid) Avoid contact with strong oxidants like liquid chlorine, concentrated oxygen. Hazardous Decomposition or Byproducts May form SO 5. If incomplete combustion, Carbon Monoxide and hydrogen chloride. Hazardous Polymerization May Occur Conditions to Avoid N/A Will Not Occur - Spill or Leak Procedures Steps to be taken in case material is released or spilled Handle as an ofl spill. Avoid breathing vapors or mist. Use adequate ventilation. Waste disposal method Chemical waste disposal is governed by the Resource Conversation and Recovery Act, as well as by other local, state, and federal laws and ~egulations. " [SARA/TITLE HI, Section 313 Status - 1,2 - Dichlorobenzene - <2.5% - Special Protection Information Respiratory Protection (Specify type) I concentrated vapors are present & adequate ventilation in unavailable, use proper respirator for organic vapors. Ventilation Local Exhaust Special N/A Mechanical (General) Other N/A Protective Gloves Plastic or rubber recommended. Eye Protection Chemical splash goggles recommended. Other Protective Equipment Periodic environmental air monitoring should be performed if aperations cause air concentrations approaching PEL limits. - Special Precautions Precautions to be taken in handling and storing Store at temperatures below 100°F. Store in a cool, dry area in tightly closed containers. Usc adequate ventilation. Avoid excessive heat, sparks, or open flames. Avoid prolonged or repeated skin contact. Other Precautions Avoid breathing oil mist. Normal hygienic and safety precautions should be observed when handling chemicals. The above information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of Fiske Brothers Refining Co., d/b/a LUBRIPLATE Lubricants Co, The data on these sheets relates only to the specific material designated ‘erein. Fiske Brothers Refining Co., d/b/a LUBRIPLATE Lubricants Co. assumes no legal responsibility for use or reliance upon s data. Date Prepared September 18. 2007 Prepared by: James R. Kontak LUBRIPLATE"® MATERIAL SAFETY DATA SHEET Section PRODUCT NAME OR NUMBER FORMULA LUBRIPLATE Air Tool Lubricant Mineral Oil and Additives GENERIC/CHEMICAL NAME: NSF Registration No: Petroleum Lubricating Oil NA Manufacturer's Name Fiske Brothers Refining Co., d/b/a LUBRIPLATE Lubricants Co. Address 1500 Oakdale Ave., Toledo, Ohio 43605 129 Lockwood St., Newark, NJ 07103 Emergency Telephone Number 1-800-255-3924 - CHEM-TEL (24 hour) Telephone Number for Information 419-691-2491 - Toledo Office