Pourable Sealer S-10 Part A

Principle Routes of Exposure

Inhalation, Skin Contact Signs and Symptoms of May cause minor temporary eye or respiratory system irritation. Exposure: May cause skin irritation if the skin is scratched or cut.

Medical Conditions Generally Aggravated by Exposure

None known by Exposure:

Potential chronic health

No known adverse effects. Carcinogenicity: None SECTION 4: FIRST AID MEASURES First Aid Procedures: For eyes, flush immediately with gentle stream of water for at least 15 minutes, preferably at eye wash fountain. For skin contact, wash affected area thoroughly with soap and water. For inhalation, remove to fresh uncontaminated air. In case of accidental ingestion, do not induce vomiting. Get medical attention and advise the physician of the nature of the material. The mixture of parts A and B must be immediately removed from the skin using Acetone. SECTION 5: FIRE FIGHTING PROCEDURES Suitable Extinguishing Media: Water fog, foam, CO2 or dry chemical. Hazardous Combustion Products: Oxides of carbon, nitrogen and traces of butadiene. Recommended Fire Fighting Wear impermeable protective clothing and self-contained Procedures: breathing apparatus. Toxic fumes and vapors may be evolved. Unusual Fire and Explosion Heat from fire can generate flammable vapor. Vapors may be Hazards: heavier than air. May travel long distances along ground before igniting / flashing back to vapor source. Fine sprays/mists may be combustible at room temperatures below normal flash point. Polyurethane and polyisocyanurates produced from this product in combination with phosphorus containing flame retardants may, when pyrolysed at or above 300°C (572°F) produce toxic by- products. SECTION 6: PRECAUTIONS FOR SAFE HANDLING AND USE