Note: Ingredients listed on restricted chemical lists
EC/CAS
687-47-8
Name of the chemical
Ethyl (S)-2-hydroxypropionate
Concentration
N/A
General Information
Revision date
2019-05-01
Product name
Fireshield TimberClear Top Coat Matt
CAS No.
687-47-8
1.2.1 Relevant identified uses
Clear bio-solvent based top coat for use with Fireshield TimberClear 1FR intumescent paint for timber
supplier name
Fireshield Coatings, a division of FPC Limited Partnership
Emergency telephone
000- Police, Ambulance and Fire Brigade
Icons in SDS
Company Information
company name
Fireshield Coatings, a division of FPC Limited Partnership
e-mail address of the competent person responsible for the Safety Data Sheet
info@fireshieldcoatings.com
GHS Information
Signal word
DANGER
Section 2
SECTION 2: Hazards identification
GHS Classification Classified as hazardous according to the Hazardous Chemical Information System (HCIS), classified in accordance with the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) Classified as a Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail - 2017.
2.1 Classification of the substance or mixture
Flammable Liquids: Category 2 - Acute Toxicity (oral): Category 4 - Skin Irritation: Category 2 - Eye irritation: Category 2 - Skin Sensitization: Category 1 - STOT Single Exposure: Category 3 (narcotic effects) DANGER Highly Flammable Harmful
Prevention
P102 - Keep out of reach of children. P103 - Read label before use. P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P210 - Keep away from ignition sources. No smoking. P233 - Keep container tightly closed. P240 - Ground/bond container and receiving equipment. P241 - Use explosion-proof electrical equipment. P242 - Use only non-sparking tools. P243 - Take precautionary measures against static discharge. P260 - Do not breathe dust/fume/gas/mist/vapours/spray. P264 - Wash hands thoroughly after handling. P270 - Do not eat, drink or smoke when using this product. P271 - Use only outdoors or in a well-ventilated area. P272 - Contaminated work clothing should not be allowed out of the workplace. P273 - Avoid release to the environment. P280 - Wear protective gloves/eye/face protection. P281 - Use personal protective equipment as required.
Response
P101 – If medical advice is needed, have product container or label at hand. P303 + P361 + P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P331 - Do NOT induce vomiting. P337+P313 - If eye irritation persists Get medical advice/attention. P302+P352 - IF ON SKIN Wash with plenty of soap and water. P332 + P313 – If skin irritation occurs: Get medical advice/attention. P362 – Take off contaminated clothing and wash before re-use. P308+P313 - IF exposed or concerned: Get medical advice/ attention. P304+P340 - IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. P312 - Call a POISON CENTRE or doctor/physician if you feel unwell. P370 + P378 - In case of fire: Use Carbon dioxide, extinguishing powder, foam for extinction
Storage
P403+P233+P235 - Store in a well-ventilated place. Keep container tightly closed. Keep cool. P405 - Store locked up.
Health hazards
Long lasting and repeated exposure to solvent vapors above the limit may result seriously detrimental to health such as mucous membrane and respiratory and may cause permanent nerve damage Fire: Prevent formation of flammable or explosive concentrations of vapor in air. Avoid vapor concentrations above the occupational exposure limits. Ventilate well. Open flame or other ignition sources may not occur. The product may build up electrostatic charges. Ground all equipment. Prevent sparks from static electricity. Operators should wear antistatic footwear and clothing
Other physicochemical hazards
May cause damage to seals, certain painted surfaces, protective grease layers and materials of natural rubber.