Note: Ingredients listed on restricted chemical lists
EC/CAS
100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
46.1175
General Information
Revision date
2019-08-28
Product name
Part 1110 Vinyl Ester Resin
Product name
Part 1110 Vinyl Ester Resin
Identification on the label/Trade name
FIBRE GLAST DEVELOPMENTS CORP
1.2.1 Relevant identified uses
Standard Composite Manufacturing FOR CHEMICAL EMERGENCY CALL (801) 629-0667 24 HRS
Icons in SDS
Company Information
company name
FIBRE GLAST DEVELOPMENTS CORP
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H315, H317, H319, H335, H361, H372
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
GHS Classification GHS Classification Flammable Liquids Category 3 Combustible Dust Skin Irritation : Category 2 Eye Irritation : Category 2A Skin Sensitization : Category 1 Reproductive Toxicity : Category 2 Specific target organ systemic Toxicity – single exposure : Category 3 (Respiratory system)
Signal word
Danger
Hazard statements
Flammable liquid and vapor. May form combustible dust concentrations in air. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause respiratory irritation. Suspected of damaging fertility or the unborn child. Causes damage to organs (Auditory system) through prolonged or repeated exposure if inhaled.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surface. –No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust/fume/gas/mist/vapors/spray. Wash skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves/protective clothing/eyeprotection/face protection. Keep dust/air mixtures away from ignition sources. Hazardous polymerization can occur under certain conditions. Avoid excessive heat, direct sunlight, peroxides, and other polymerization catalysts. Store in a cool place and maintain proper concentrations of inhibitor and oxygen.
Response
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for Breathing. Call a POISON CENTER or doctor/physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool. Store locked up.
Disposal
Dispose of contents/container to an approved waste disposal plant.
Other hazards
Static Accumulating liquid. Hazardous polymerization mayoccur
2.1 Classification of the substance or mixture
Flammable Liquids : Category 3 Combustible Dust : Skin Irritation : Category 2 Eye Irritation : Category 2A Skin Sensitization : Category 1 Reproductive Toxicity : Category 2 Specific target organ systemic : Category 3 (Respiratory system) Toxicity – single exposure