General Information
Product name
Part 1096 High Temp Epoxy Surface Coat, Side A
Product name
Part 1096 High Temp Epoxy Surface Coat, Side A
Identification on the label/Trade name
FIBRE GLAST DEVELOPMENTS CORP
1.2.1 Relevant identified uses
Industrial Epoxy Resin supplied exclusively for workplace use FOR CHEMICAL EMERGENCY CALL (801) 629-0667 24 HRS
Icons in SDS
Company Information
company name
FIBRE GLAST DEVELOPMENTS CORP
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H303, H315, H317, H320, H335
Hazard statements
Code
Statements
H303
May be harmful if swallowed
Section 2
SECTION 2: Hazards identification
GHS CLASSIFICATION Eye irritation Category 2B Acute Toxicity Category 5 Oral) Skit Irritation Category 2 Skin Sensitizer Category 1 Respiratory Irritation STOT SE3
Signal word
Warning
Hazard statements
H320: Causes eye irritation. (Eye Irrit. 2B) H303: May be harmful if swallowed. (Acute Tox. 5 Oral) H315: Causes skin irritation. (Skin Irrit. 2) H317: May cause an allergic skin reaction. (Skin Sens. 1) H335: May cause respiratory irritation. (STOT SE3)
Precautionary statements
P202: Do not handle until all safety precautions have been read and understood. P261: Avoid breathing dust/fume/gas/mist/vapours/spray. P270: Do not eat, drink or smoke when using this product. P281: Use personal protective equipment as required. P285: In case of inadequate ventilation wear respiratory protection. P273: Avoid release to the environment. NO. CANCER REPRO-TOX TARGET ORGANS ACGIH/TLV OSHA/PEL P NO UNKNOWN N.A.mg/M3 NOTE: CONTAINS MATERIAL(S) REGULATED AS DUST HAZARDS, DISPERSED IN A NON-HAZARDOUS FORM. IF DUST IS RECREATED, APPROPRIATE RESPIRATORY AND/OR EXPLOSION PRECAUTIONS MUST STILL BE USED.
2.1 Classification of the substance or mixture
Eye irritation : Category 2B Acute Toxicity : Category 5 (Oral) Skit Irritation : Category 2 Skin Sensitizer : Category 1 Respiratory Irritation : STOT SE3
