Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
75-37-6
Name of the chemical
1,1-Difluoroethane
Concentration
N/A
General Information
Revision date
2016-08-02
Product name
ABC Fiberspray No. 6410
1.2.1 Relevant identified uses
Binder for Asbestos Fibers
Emergency telephone
CHEM TEL (U.S.) 1-800-255-3924
Icons in SDS
Company Information
company name
Fiberlock Technologies, Inc
Section 2
2.2 Label elements
Statements
Hazard statements
Contains gas under pressure; may explode if heated. Harmful if inhaled. Causes mild skin irritation. Causes serious eye irritation.
2.1 Classification of the substance or mixture
This product is considered hazardous by The 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Acute Toxicity-Inhalation (Vapors) Category 4 Acute Toxicity-Inhalation (Dust-mists) Category 2 Serious eye damage/eye irritation – Category 2 Skin sensitization – Category 1
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protection (eye protection, gloves) during application. When grinding/sanding dry films, wear respiratory protection.
Response
If on skin, wash with plenty of soap and water. If in eyes, rinse cautiously for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If inhaled, remove victim to fresh air. If exposed or concerned, get medical advice.
Storage
Keep closures tight and containers upright to prevent leakage. KEEP FROM FREEZING Product is non-combustible.
Disposal
The coating and any contaminated diking material should be thoroughly air dried and collected into drums. The drums should be sealed and labeled and land-filled or incinerated according to local, regional and national regulations.
2.3 Other hazards
Not applicable
Further information
Repeated or prolonged skin contact may cause allergic reactions with susceptible persons.
