ABC Asbestos Binding Compound

SECTION 2: Hazards identification

Use only with adequate ventilation. Emergency Overview: Avoid contact with skin and eyes. Avoid breathing vapor and spray mist. Wash hands after using.

Product definition

This product is a pigmented liquid This coating may contain materials classified as nuisance particulates (listed “as

Health hazards

Dust” in Section 2) which may be present at hazardous levels only during the Eyes: May cause slight irritation. sanding or abrading of the dried film. If no specific dusts are listed in Section 2, the Skin: Substance may cause slight skin irritation. applicable limits for nuisance dusts are ACGIH TLV 10 mg/m3 (total dust), 3 mg/ Inhalation: May cause irritation of respiratory tract. m3 (respirable fraction), OSHA PEL 10 mg/m3 (total dust), 5 mg/m3 (respirable Ingestion: Ingestion may cause gastrointestinal irritation, nausea, and vomitting. fraction). Flammability Hazards: This product is not flammable. If this product is involved Work Hygienic Practices: Avoid contact with skin. Do not get in eyes. Do not take in a fire, the decomposition products generated will include irritating vapors and internally. Avoid breathing vapors or spray mists. gases and some carbon monoxide. Ventilation: Use in well-ventilated areas. General exhaust acceptable if the Reactivity Hazards: This product is not reactive. exposure to materials in Section 2 is maintained below applicable exposure limits.

Environmental hazards

Although release of this product to the environment is Refer to OSHA Standards 1910.94, 1910.107, 1910.108. not expected to cause significant adverse effect, all releases should be avoided. Respiratory Protection: If personal exposure cannot be controlled below applicable limits by ventilation, wear a properly fitted organic vapor/particulate respirator approved by NIOSH/MSHA for protection against materials in Section 2.