Note: Ingredients listed on restricted chemical lists
EC/CAS
100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
32.8309
General Information
Version
1.6
Revision date
2018-06-27
Product name
FBARHSGK: Premium Polyester DCPD/ISO Marine Laminating Resin
1.2.1 Relevant identified uses
RESIN
Emergency telephone
800-424-9300
Icons in SDS
Company Information
company name
Fiberglass Supply Depot, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H315, H319, H335, H372
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
H315
Causes skin irritation
H319
Causes serious eye irritation
H335
May cause respiratory irritation
H372
Causes damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
GHS Classification GHS Classification Flammable liquids Category 3 Combustible Dust Skin irritation : Category 2 Eye irritation : Category 2A Specific target organ systemic toxicity - single : Category 3 (Respiratory system) exposure Specific target organ systemic toxicity - repeated : Category 1 (Auditory system) exposure (Inhalation)
Signal word
Danger
Hazard statements
Flammable liquid and vapor. May form combustible dust concentrations in air. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. Causes damage to organs (Auditory system) through prolonged or repeated exposure if inhaled.
Prevention
Keep away from heat/sparks/open flames/hot surfaces. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ ventilating/ lighting/ equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust/ fume/ gas/ mist/ vapors/ spray. Wash skin thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/ eye protection/ face protection. Keep dust/air mixtures away from ignition sources. Hazardous polymerization can occur under certain conditions. Avoid excessive heat, direct sunlight, peroxides, and other polymerization catalysts. Store in a cool place and maintain proper concentrations of inhibitor and oxygen.
Response
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/ attention if you feel unwell. If skin irritation occurs: Get medical advice/ attention. If eye irritation persists: Get medical advice/ attention. Take off contaminated clothing and wash before reuse. In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool. Store locked up.
Disposal
Dispose of contents/ container to an approved waste disposal plant.
Other hazards
Static Accumulating liquid Hazardous polymerization may occur.
2.1 Classification of the substance or mixture
Flammable liquids : Category 3 Combustible Dust : Skin irritation : Category 2 Eye irritation : Category 2A Specific target organ : Category 3 (Respiratory system) systemic toxicity - single exposure Specific target organ : Category 1 (Auditory system) systemic toxicity - repeated exposure (Inhalation)