Putty Polyester, Light Weight Bonding FC8

Hazard statements (CLP)

H226, H315, H318, H333, H351, H401

Code

Statements

H226

Flammable liquid and vapour

2.1 Classification of the substance or mixture

Health: Skin Irritation/Corrosion, Category 2 Eye Irritation, Category 2A Acute Toxicity (Inhalation), Category 4 STOT SE, Category 3 STOT RE, Category 1 Physical: Flammable Liquids, Category 3

2.2 Label elements

Flame

Health hazards

Exclamation mark

Signal word

DANGER

Hazard statements

H226: Flammable liquid and vapour. H318: Causes serious eye damage. H315: Causes skin irritation. H333: May be harmful if inhaled. H351: Suspected of causing cancer. H401: Toxic to aquatic life.

Prevention

P202: Do not handle until all safety precautions have been read and understood. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280: Wear protective gloves/protective clothing/eye protection/face protection. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof [electrical/ventilating/lighting] equipment. P284: In case of inadequate ventilation, wear respiratory protection. P264: Wash skin thoroughly after handling. P273: Avoid release to the environment.

Response

P305 If in eyes Rinse cautiously with water for several minutes. Seek medical attention for prolonged irritation P337+P313 If eye irritation persists Get medical advice/attention P304+P340: If inhaled; Remove person to fresh air and keep comfortable for breathing. P342: If experiencing respiratory symptoms seek medical assistance. P302+P352: If on skin; Wash with plenty of water. P332+P313 If skin irritation occurs Get medical advice/attention

Storage

P403+P235: Store in a well-ventilated place. Keep cool.

Disposal

P501: Dispose of contents/container to an approved waste disposal plant. 1048ZK1E: Dispose of product and container according to Federal, State and local regulations. EMERGENCY OVERVIEW PHYSICAL APPEARANCE: Colored paste, styrene odor. IMMEDIATE CONCERNS: Flammable liquid and vapor. Vapors may travel along the ground to an ignition source and flash fire. May cause respiratory tract, eye and skin irritation.

Potential health effects

EYES: Contact may cause eye irritation, and possibly permanent eye damage. SKIN: May cause moderate to severe skin irritation. Prolonged exposure may cause skin burns. INGESTION: May be harmful if swallowed. Do not induce vomiting, Liquid can directly enter the lungs (aspiration) when swallowed or vomited. Serious lung damage and possibly fatal chemical pneumonia (chemical pneumonitis) can develop if this occurs. INHALATION: Breathing of high vapor concentrations may cause central nervous system (CNS) depression resulting in dizziness, light-headedness, headache, nausea and loss of coordination. Continued inhalation may result in unconsciousness and death. Vapors expected to be slightly irritating. CARCINOGENICITY IARC Classified 2B (possible for humans) COMMENTS: This product contains non-hazardous components which may become a dust nuisance when removed by abrasive blasting, sanding, or grinding.