MLO Mechanical Lubricant Oil

FG Chemicals Ltd

Revision date : 2017-08-17

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08 GHS09
Health risk rating 4
Safety risk rating 1
Environmental risk rating 4

Note: Ingredients listed on restricted chemical lists

EC/CAS

68476-34-6

Name of the chemical

Fuels, diesel, no. 2

Concentration

N/A

EC/CAS

64742-54-7

Name of the chemical

Distillates (petroleum), hydrotreated heavy paraffinic

Concentration

N/A

EC/CAS

270-676-1

Name of the chemical

Fuels, diesel, no. 2

Concentration

N/A

EC/CAS

265-157-1

Name of the chemical

Distillates (petroleum), hydrotreated heavy paraffinic

Concentration

N/A

General Information

Revision date

2017-08-17

Product name

MLO Mechanical Lubricant Oil

1.2.2. Uses advised against

This product shall not be used for applications, different from those recommended in chapter 1.2.1, without the prior written consent from the supplier

Emergency telephone

BE: + 0844 892 0111

Icons in SDS

Company Information

company name

FG Chemicals Ltd

e-mail address of the competent person responsible for the Safety Data Sheet

info@fgchemicals.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H304, H315, H332, H351, H373, H411

Hazard statements

Code

Statements

H304

May be fatal if swallowed and enters airways

Section 2

2.1 Classification of the substance or mixture

The mixture is classified as following according to REGULATION (EC) No 1272/2008: REGULATION (EC) No 1272/2008

Hazard statements

Asp. Tox. 1 H304 Skin Irrit. 2 H315 Acute Tox. 4 H332 Carc. 2 H351 STOT RE 2 H373 Aquatic Chronic 2 H411 For full text of H- phrases: see section 2.2. H304: May be fatal if swallowed and enters airways H315: Causes skin irritation H332: Harmful if inhaled H351: Suspected of causing cancer H373: May cause damage to organs (Thymus, liver) H411: Toxic to aquatic life with long lasting effects

Signal word

Danger

Precautionary statements

P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe dust/fume/ gas/mist/vapours/spray. P264: Wash hands thoroughly after handling. P271: Use only outdoors or in a well-ventilated area. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. P301 + P310 IF SWALLOWED Immediately call a POISON CENTER/ doctor P302 + P352 IF ON SKIN Wash with plenty of water P304 + P340 IF INHALED Remove person to fresh air and keep comfortable for breathing. P308 + P313 IF exposed or concerned Get medical advice/attention P312: Call a POISON CENTER/ doctor if you feel unwell. P314: Get medical advice/attention if you feel unwell. P331: Do NOT induce vomiting. P332 + P313 If skin irritation occurs Get medical advice/attention P362 + P364: Take off contaminated clothing and wash it before reuse. P391: Collect spillage. P405: Store locked up. P501: Dispose of contents/container in accordance with local regulation.

Contains

10% of components with unknown hazards to the aquatic environment. Vapours in high concentration may cause flammable or explosive atmospheres. Product vapours are heavier than air and may accumulate in pits or low-lying areas. Hydrogen sulfide gas can accumulate in storage tanks and reach potentially hazardous concentrations. There is the possibility of the product penetrating through the skin to the subcutaneous tissues in case of failure of equipment at high temperature and pressure. When working with hot product, there is a risk of thermal burns.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.