EMCoat S Paint

Hazard statements (CLP)

H317

Code

Statements

H317

May cause an allergic skin reaction

SECTION 2: Hazards identification

Signal word

Warning

Hazard statements

May cause an allergic skin reaction.

Precautionary statements

General Read label before use. Keep out of reach of children. If medical advice is needed have product container or label near at hand.

Prevention

Use proper “personal protective equipment” (PPE); gloves, eye, face protection, protective clothing. Avoid breathing vapor.

Response

IF ON SKIN: Wash with plenty of soap and water. Wash any contaminated clothing before reuse. If skin irritation or rash occurs seek medical attention. If you feel unwell following exposure, seek medical attention.

Storage

Store in original container in a dry location at temperatures between 50 °F – 90 °F (10 °C – 33 °C).

Disposal

Dispose of contents and container in accordance with all local, regional, national, and international regulations.

2.3 Other hazards

None known

2.1 Classification of the substance or mixture

SKIN SENSITIZATION – Category 1 GHS Label Elements: Hazard Pictogram: Signal Word: Warning Hazard Statement: May cause an allergic skin reaction. Precautionary statements: General: Read label before use. Keep out of reach of children. If medical advice is needed have product container or label near at hand. Prevention: Use proper “personal protective equipment” (PPE); gloves, eye, face protection, protective clothing. Avoid breathing vapor. Response: IF ON SKIN: Wash with plenty of soap and water. Wash any contaminated clothing before reuse. If skin irritation or rash occurs seek medical attention. If you feel unwell following exposure, seek medical attention. Storage: Store in original container in a dry location at temperatures between 50 °F – 90 °F (10 °C – 33 °C). Disposal: Dispose of contents and container in accordance with all local, regional, national, and international regulations. Hazards not otherwise classified: None known. Section 3: Composition/Information on Ingredients Substance / mixture: Mixture. Ingredient Name Typical Composition C.A.S. Number EINECS Number Nickel (Ni) 0 - 25 % 7440-02-0 2311114 Colloidal silicon dioxide < 3 % 112945-52-5 - 3-Iodo-2-propynyl Butyl Carbamate <0.3% 55406-53-6 - Any concentration shown as a range is to protect confidentiality or is due to batch variation. There are no additional ingredients present which, within the current knowledge of the manufacturer and in the concentrations applicable, are classified as hazardous to health and require reporting in this section. Section 4: First-Aid Measures EYES: Immediately flush eyes with lukewarm water, including under eyelids, for at least 15 minutes. Seek medical attention. INHALATION: Remove to fresh air. If not breathing, give artificial respiration, preferably mouth to mouth. Qualified personnel may give oxygen if breathing is difficult. Seek medical attention. SKIN: Remove contaminated clothing, wash affected area with soap and warm water for at least 10 minutes. To avoid further irritation, do not rub or scratch the irritated areas. Seek medical attention if symptoms develop or persist. INGESTION: Rinse mouth with water. Do not induce vomiting. Seek medical attention. Never induce vomiting or give anything by mouth to an unconscious person. Most important symptoms / effects, acute, and delayed Potential acute health effects: Eye contact: No known significant effects or critical hazards. Inhalation: No known significant effects or critical hazards. Skin contact: May cause an allergic skin reaction. Ingestion: No known significant effects or critical hazards. Over-exposure signs / symptoms Eye contact: No specific data. Inhalation: No specific data. Skin contact: Adverse symptoms may include irritation or redness. Ingestion: No specific data. Section 5: Fire-Fighting Measures EXTINGUISHING MEDIA: Use extinguishing agent suitable for surrounding material and type of fire. Foam, CO2, and dry chemical are recommended. UNSUITABLE EXTINGUISHING MEDIA: None known. SPECIFIC HAZARDS ARISING FROM THE MATERIAL: May emit carbon oxides and / or toxic metal oxide fumes. SPECIAL PROTECTIVE ACTIONS FOR FIRE FIGHTERS: Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS: Fire-fighters should wear appropriate protective equipment and self contained breathing apparatus (SCBA) with a full face piece operated in positive pressure mode. Section 6: Accidental Release Measures PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES: Avoid contact with skin, eyes, or clothing. Wear appropriate NIOSH-approved respirators if collection and disposal of dust is likely. Clean up material and put into a suitable container and dispose in accordance with applicable regulations. Avoid breathing vapor or mist. SPILL / LEAK PROCEDURES: Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Beware of vapors accumulating to form explosive concentrations. Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. SMALL SPILLS: Contain spillage if without risk, then collect with non-combustible absorbent material. Put contaminated materials into a metal container and do not seal. If risk of fire is suspected cover