Manufactured Stone Veneer Accessories

Hazard statements (CLP)

H315, H319, H372

Code

Statements

H315

Causes skin irritation

2.1 Classification of the substance or mixture

Manufactured Stone Veneer Accessories conform to the definition of an article according to the OSHA Hazard Communication Standard 29 CFR 1910.1200(c). Under normal conditions, the article releases no more than minute or trace amounts of hazardous chemicals, and the article does not pose a physical hazard or health risk to employees. An SDS is not required for articles; however, this SDS is provided to communicate hazards which may apply where activities relating to the alteration of the Manufactured Stone Veneer Accessories (cutting, grinding, crushing, drilling, or breaking) may result in the release of a hazardous substance in dust. GHS Classification(s) for Manufactured Stone Veneer Accessories according to OSHA Hazard Communication Standard (29 CFR 1910.1200) under normal handling conditions: None GHS Classification(s) for dust generated from cutting, grinding, crushing, drilling, or breaking Manufactured Stone Veneer Accessories according to OSHA Hazard Communication Standard (29 CFR 1910.1200) under use conditions that may result in the release of hazardous substances: Skin Corrosion/Irritation (H315) Eye Damage/Irritation (H319) Specific Target Organ Toxicity - Repeated Exposure (STOT-RE), Category 1 (H372)

Additional information

For full text of GHS Hazard Statements (H-Statements) and associated Precautionary Statements (P- Statements), see below.

2.2 Label elements

Under normal conditions, no Hazard Pictograms, Signal Words, or Precautionary Statements are The following Hazard Pictograms, Signal Word, and Precautionary Statements only apply to the dust generated from altering Manufactured Stone Veneer Accessories.

Signal word

Danger

Hazard statements

H315: Causes skin irritation. (For dust generated from cutting, H319: Causes eye irritation. grinding, crushing, drilling, or H372: Causes damage to lungs through prolonged or repeated breaking Manufactured Stone Veneer Accessories.) inhalation exposure.

Precautionary statements

P260: Do not breathe dust. (For dust generated from cutting, P270: Do not eat, drink, or smoke while using this product. grinding, crushing, drilling, or P264: Wash thoroughly after handling. breaking Manufactured Stone Veneer P280: Wear protective gloves/protective clothing/eye Accessories.) protection/face protection. P302 + P352 IF ON SKIN Wash with plenty of water P304 + P340 IF INHALED Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. P314: Get medical advice/attention if you feel unwell. P332 + P313: If skin irritation occurs, get medical advice/attention. P337 + P313: If eye irritation occurs, get medical attention. P362 + P364: Take off contaminated clothing and wash before reuse. P501: Dispose of generated dust in accordance with local, regional, national, and international regulations. Wet methods of cutting, grinding, crushing, drilling, or breaking natural or manufactured stone are the preferred methods for controlling dust.

2.3 Other hazards

The health effects listed herein are unlikely to occur unless dust is created through various methods of altering (cutting, grinding, crushing, drilling, or breaking) the product. Silica Dust (respirable, crystalline fraction) may be released through this process. Dust may cause eye damage or skin irritation. May irritate respiratory tract. May, under repeated inhalation exposure, cause lung damage.