Note: Ingredients listed on restricted chemical lists
EC/CAS
2634-33-5
Name of the chemical
1,2-Benzisothiazol-3(2H)-one
Concentration
0.025-<0.1%
EC/CAS
25322-68-3
Name of the chemical
polyethyleneglycol
Concentration
10-<20%
General Information
Revision date
2021-05-14
Product name
MOBILCUT 320-NEW
Product Synonyms
Synthetic Base Stocks and Additives
1.2.1 Relevant identified uses
Water-miscible cutting fluid
supplier name
ExxonMobil Petroleum & Chemical BV
Emergency telephone
ALGERIA +213 2197 9898; MOROCCO +212 537 68
Icons in SDS
Company Information
company name
ExxonMobil Petroleum & Chemical BV
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H318
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
This material is hazardous according to regulatory guidelines (see (M)SDS Section 15).
2.1 Classification of the substance or mixture
Skin irritation: Category 2. Skin Sensitiser: Category 1. Serious eye damage: Category 1.
Signal word
Danger
Hazard statements
Health: H315: Causes skin irritation. H317: May cause allergic skin reaction. H318: Causes serious eye damage.
Prevention
P261: Avoid breathing mist / vapours. P264: Wash skin thoroughly after handling. P272: Contaminated work clothing should not be allowed out of the workplace. P280: Wear protective gloves and eye / face protection.
Response
P302 + P352 IF ON SKIN Wash with plenty of soap and water P305 + P351 + P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER or doctor/physician. P333 + P313 If skin irritation or rash occurs Get medical advice/attention P362 + P364: Take off contaminated clothing and wash it before reuse.
Disposal
P501: Dispose of contents and container in accordance with local regulations.
Contains
1,2-benzisothiazol-3(2H)-one; dicyclohexylamine; 2-aminoethanol; POLY(OXY-1,2-ETHANEDIYL), ALPHA- PHENYL-W-HYDROXY-, PHOSPHATE
Other physicochemical hazards
No significant hazards.
Health hazards
High-pressure injection under skin may cause serious damage. This product may be used in certain applications where misting can occur. Excessive exposure to liquids and mists may cause skin and eye irritation. In addition, excessive exposure to mists may cause respiratory irritation and damage and aggravate pre-existing emphysema or asthma. May be irritating to nose, throat, and lungs.
Environmental hazards
No significant hazards. NOTE: This material should not be used for any other purpose than the intended use in Section 1 without expert advice. Health studies have shown that chemical exposure may cause potential human health risks which may vary from person to person.
