BASE_FUEL_IMO2020_1600 CST

Hazard statements (CLP)

H332, H350, H361d, H373, H410

Code

Statements

H332

Harmful if inhaled

SECTION 2: Hazards identification

This material is hazardous according to regulatory guidelines (see (M)SDS Section 15).

2.1 Classification of the substance or mixture

Acute inhalation toxicant: Category 4. Carcinogen: Category 1B. Reproductive toxicant (developmental): Category 2. Specific target organ toxicant (repeated exposure): Category 2. Acute aquatic toxicant: Category 1. Chronic aquatic toxicant: Category 1.

Signal word

Danger

Hazard statements

Health: H332: Harmful if inhaled. H350: May cause cancer. H361d: Suspected of damaging the unborn child. H373: May cause damage to organs through prolonged or repeated exposure. (Blood, Liver, Thymus).

Environmental hazards

H410: Very toxic to aquatic life with long lasting effects. Supplemental: EUH066: Repeated exposure may cause skin dryness or cracking. No additional hazards. NOTE: This material should not be used for any other purpose than the intended use in Section 1 without expert advice. Health studies have shown that chemical exposure may cause potential human health risks which may vary from person to person.

Prevention

P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe mist / vapours. P271: Use only outdoors or in a well-ventilated area. P273: Avoid release to the environment. P280: Wear protective gloves and clothing.

Response

P304 + P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P308 + P313 IF exposed or concerned Get medical advice/ attention P312: Call a POISON CENTER or doctor/physician if you feel unwell. P391: Collect spillage.

Storage

P405: Store locked up.

Disposal

P501: Dispose of contents and container in accordance with local regulations.

Contains

FUEL OIL, RESIDUAL

Other physicochemical hazards

Thermal burn hazard - contact with hot material may cause thermal burns. Material can accumulate static charges which may cause an ignition. Material can release vapors that readily form flammable mixtures. Vapor accumulation could flash and/or explode if ignited. Combustible.

Health hazards

High-pressure injection under skin may cause serious damage. Hydrogen sulfide, a highly toxic gas, may be present. Signs and symptoms of overexposure to hydrogen sulfide include respiratory and eye irritation, dizziness, nausea, coughing, a sensation of dryness and pain in the nose, and loss of consciousness. Odor does not provide a reliable indicator of the presence of hazardous levels in the atmosphere. May be irritating to the eyes, nose, throat, and lungs.