ACHIEVE PP POLYMERS

SECTION 2: Hazards identification

None as defined under 29 CFR 1910.1200 This material is hazardous according to regulatory guidelines (see (M)SDS Section 15). CLASSIFICATION Combustible Dust LABEL Pictogram: No Pictogram

Hazard statements

May form combustible dust concentrations in air.

Other physicochemical hazards

WARNING: May form combustible dust concentrations in air (during processing/handling). Thermal burn hazard - contact with hot material may cause thermal burns. Material can accumulate static charges which may cause an ignition. Spilled pellets present a slipping hazard on hard surfaces.

Health hazards

If dust is generated, it could scratch the eyes and cause minor irritation to the respiratory tract. When heated, the vapors/fumes given off may cause respiratory tract irritation.

Environmental hazards

No significant hazards. NFPA Hazard ID: Health: 1 Flammability: 1 Reactivity: 0 HMIS Hazard ID: Health: 1 Flammability: 1 Reactivity: 0

2.1 Classification of the substance or mixture

Combustible Dust LABEL: Pictogram: No Pictogram Signal Word: Warning Hazard Statements: May form combustible dust concentrations in air. Other hazard information: HAZARD NOT OTHERWISE CLASSIFIED (HNOC): None as defined under 29 CFR 1910.1200. PHYSICAL / CHEMICAL HAZARDS WARNING: May form combustible dust concentrations in air (during processing/handling). Thermal burn hazard - contact with hot material may cause thermal burns. Material can accumulate static charges which may cause an ignition. Spilled pellets present a slipping hazard on hard surfaces. HEALTH HAZARDS If dust is generated, it could scratch the eyes and cause minor irritation to the respiratory tract. When heated, the vapors/fumes given off may cause respiratory tract irritation. ENVIRONMENTAL HAZARDS No significant hazards. NFPA Hazard ID: Health: 1 Flammability: 1 Reactivity: 0 HMIS Hazard ID: Health: 1 Flammability: 1 Reactivity: 0 SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS This material is defined as a mixture. No Hazardous Substance(s) or Complex Substance(s) required for disclosure. SECTION 4 FIRST AID MEASURES INHALATION At ambient/normal handling temperatures, no adverse effects due to inhalation of dust are expected. In case of adverse exposure to vapors and / or aerosols formed at elevated temperatures, immediately remove the affected victim from exposure. Administer artificial respiration if breathing is stopped. Keep at rest. SKIN CONTACT Wash contact areas with soap and water. For hot product: Immediately immerse in or flush affected area with large amounts of cold water to dissipate heat. Cover with clean cotton sheeting or gauze and get prompt medical attention. EYE CONTACT Flush thoroughly with water for at least 15 minutes. Get medical assistance. INGESTION No adverse effects due to ingestion are expected. SECTION 5 FIRE FIGHTING MEASURES EXTINGUISHING MEDIA Appropriate Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.