Note: Ingredients listed on restricted chemical lists
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
1-2.5%
EC/CAS
220-239-6/2682-20-4
Name of the chemical
2-Methyl-2H-isothiazol-3-one
Concentration
<0.0015%
EC/CAS
247-761-7/26530-20-1
Name of the chemical
2-Octyl-2H-isothiazol-3-one
Concentration
≥0.00025-<0.0015%
EC/CAS
264-843-8/64359-81-5
Name of the chemical
4,5-Dichloro-2-octylisothiazol-3(2H)-one
Concentration
≥0.00025-<0.0015%
EC/CAS
215-279-6
Name of the chemical
Calcium carbonate
Concentration
50 - < 100%
General Information
Version
4.0
Revision date
2025-08-19
Product name
EWI-040 Silicone Silicate Render
Manufacturer Name
EWI Pro Insulation Systems Ltd
Emergency telephone
+44/(0)800 80 70 60
Icons in SDS
Company Information
company name
EWI Pro Insulation Systems Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
info@ewipro.com, technical@ewipro.com, sekretariat@kreisel.pl
GHS Information
Signal word
Not required
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Hazard pictograms
Not required
Signal word
Not required
Hazard statements
Not required
Precautionary statements
Not required
Additional information
EUH208 Contains 2-Methyl-2H-isothiazol-3-one, 2-Octyl-2H-isothiazol-3-one, 4,5-dichloro-2-octyl 2H-isothiazol-3-one. May produce an allergic reaction. EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. This product contains microplastics. Contains the following biocidal active ingredients to protect the product. Please note the information in the safety data sheet and the legal regulations: MIT, OIT
2.3 Other hazards
No further relevant information available. Regulation (EC) No 2055/2023 on the restriction of microplastics The product contains ≥ 0.01% microplastic particles according to Regulation EU 2023/2055. When processed as intended, these particles are immobilised in a solid matrix or are modified in such a way that they no longer fall under the definition of microplastics. Follow the manufacturer's instructions for use and disposal to avoid releasing the product into the environment. Process leftover product and allow it to harden. Recycle or dispose of the cured residues in accordance with the applicable regulations. Collect the water from the cleaning tools and reuse it or dispose of it in the local sewage system. Do not allow cleaning water to enter the environment.
PBT Substances
This substance/mixture contains no components classified as persistent, bioaccumulative and toxic (PBT) at levels of 0.1% or higher
vPvB Substances
This substance/mixture contains no components classified as very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 The product is not classified, according to the GB CLP regulation. 2.2 Description of hazards
