ANTIGRAFFITI COATING (component B) - Two component polyurethan coating

Hazard statements (CLP)

H226, H312+H332, H315, H317, H335

Code

Statements

H226

Flammable liquid and vapour

2.1 Classification of the substance or mixture

Directive 67/548/EC and Directive 1999/45/EC: This product was classified in accordance with Directive 67/548/EC and Directive 1999/45/EC, adapting the requirements to Regulation (EC) nº1907/2006 (REACH regulation). Xi: R37/38 - Irritating to respiratory system and skin, R43 - May cause sensitisation by skin contact Xn: R20/21 - Harmful by inhalation and in contact with skin R10 - Flammable CLP Regulation (EC) nº 1272/2008: Classification of this product has been carried out in accordance with CLP Regulation (EC) nº 1272/2008. Acute Tox. 4: Acute toxicity, Category 4 Flam. Liq. 3: Flammable liquids, Category 3 Skin Irrit. 2: Skin irritation, Category 2 Skin Sens. 1: Sensitisation, skin, Category 1 STOT SE 3: Respiratory tract toxicity, single exposure, Category 3

2.2 Label elements

Directive 67/548/EC and Directive 1999/45/EC: In accordance with the legislation, the elements on the label are as follows: Xn Harmful

R-phrase(s)

R10: Flammable R20/21: Harmful by inhalation and in contact with skin R37/38: Irritating to respiratory system and skin R43: May cause sensitisation by skin contact

S-phrase(s)

24-57 SECTION 2: HAZARDS IDENTIFICATION (continue) S24: Avoid contact with skin S36/37: Wear suitable protective clothing and gloves S43: In case of fire, use polyvalent powder ABC S51: Use only in well-ventilated areas

Supplemental label elements

P91: Contains isocyanates-Read the information provided by the manufacturer EUH204: Contains isocyanates. May produce an allergic reaction EUH208: Contains Hexamethylene diisocyanate, Hexamethylene diisocyanate, oligomers. May produce an allergic reaction

Hazardous Ingredients

Hexamethylene diisocyanate, oligomers (CAS 28182-81-2); Xylene (mixture of isomers) (CAS 1330-20-7) CLP Regulation (EC) nº 1272/2008: Warning Hexamethylene diisocyanate, oligomers (CAS 28182-81-2); Xylene (mixture of isomers) (CAS 1330-20-7); Hexamethylene diisocyanate (CAS: 822-06-0)

Hazard statements

Acute Tox. 4: H312+H332 - Harmful in contact with skin or if inhaled Flam. Liq. 3: H226 - Flammable liquid and vapour Skin Irrit. 2: H315 - Causes skin irritation Skin Sens. 1: H317 - May cause an allergic skin reaction STOT SE 3: H335 - May cause respiratory irritation

Precautionary statements

P280: Wear protective gloves/protective clothing/eye protection/face protection P303+P361+P353 IF ON SKIN (or hair) Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P321: Specific treatment is urgently needed (go to see a doctor with the Safety data sheet for this product) P333+P313 If skin irritation or rash occurs Get medical advice/attention P370+P378 In case of fire Use ABC powder extinguisher to extinguish P405: Store locked up P501: Dispose of the contents/containers in accordance with the current legislation on waste treatment

2.3 Other hazards

Non-applicable