Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2015-07-27
Product name
RECOVERED ETHANOL-190 PROOF
Product Synonyms
None
CAS No.
64-17-5
1.2.1 Relevant identified uses
photographic processing chemical. For industrial use only
supplier name
Everchem, LLC
Emergency telephone
Spill, Leak, Fire, Exposure or Accident
Icons in SDS
Company Information
company name
Everchem, LLC
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
Classification of the chemical in accordance with paragraph (d) of 29 CFR 1910.1200: Classification of the chemical in accordance with paragraph (d) of 29 CFR 1910.1200:
Principle Routes of Exposure
Flammable liquids Category 2 -- Serious eye damage/eye irritation Category 2B --
Contains
Ethanol (64-17-5)
Signal word
Danger
Hazard statements
Highly flammable liquid and vapour. Causes eye irritation
Prevention
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ ventilating/ lighting/ equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Wash skin thoroughly after handling. Wear protective gloves/ protective clothing/ eye protection/ face protection.
Response
In case of fire, use water/water spray/water jet/carbon dioxide/sand/foam/alcohol resistant foam/chemical powder for extinction. IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/ attention.
Storage
Store in a well-ventilated place. Keep cool
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulation. HMIS III Hazard Ratings: Health - 1, Flammability - 3, Physical Hazard - 0 NFPA Hazard Ratings: Health - 1, Flammability - 3, Instability - 0 NOTE: HMIS III and NFPA 704 (2007) hazard indexes involve data review and interpretation that may vary among companies. They are intended only for rapid, general identification of the magnitude of the potential hazards. To adequately address safe handling, ALL information in this MSDS must be considered.