EUTECTOR 16B

Hazard statements (CLP)

H314

Code

Statements

H314

Causes severe skin burns and eye damage

SECTION 2: Hazards identification

EMERGENCY OVERVIEW Chemically stable and inert. Does not pose a fire hazard as shipped. Non-Flammable Flames used for brazing can ignite combustibles. Refer to American National Standard Z49.1 for fire prevention during welding. In case of fire, use NIOSH/MSHA self contained breathing apparatus.

Principle Routes of Exposure

Primary route of entry is the respiratory system. Other possible routes are eyes and/or skin contact

Potential health effects

EYES: May cause eye damage. SKIN: Spatter and flames from brazing may cause burns. Flux may cause skin burns. INGESTION: Danger of serious damage to health if swallowed. Toxic. INHALATION: Danger of serious damage to health by prolonged exposure through inhalation. WARNING This product contains or produces a chemical known to the State of California to cause birth defects (or other reproductive harm) and cancer. (California Health & Safety Code 25249.5 et seq.). WARNING: avoid breathing welding fumes and gases; they may dangerous to your health. Always use adequate ventilation and use appropriate personal protection equipment. CARCINOGENICITY WELDING FUMES (not otherwise specified) are considered to be carcinogenic defined with no further categorization by NIOSH and IARC. Although this product does not require a hazard warning label in all countries, we recommend that the safety advice should be observed:

Hazard pictograms

GHS08 Boric acid, Sodium Tetraborate Decahydrate GHS05- GHS06 Potassium Bifluoride C ≥ 10,0 %

Hazard categories

Reproductive toxicity: Repr. Cat. 1B Skin Corr. 1B; H314 R25: Toxic if swallowed R34 Causes burns

Hazard statements

R60 May impair fertility R61 May cause harm to the unborn child H301Toxic if swallowed H314 Causes severe skin burns and eye damage.

Precautionary statements

S53 Avoid exposure - obtain special instructions before use. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S1/2: Keep locked up and out of the reach of children S22: Do not breathe dust S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S37: Wear suitable gloves S45: In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) P285 In case of inadequate ventilation wear respiratory protection. P314 Get medical advice/attention if you feel unwell. P280 Wear protective gloves/protective clothing/eye protection/face protection. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P501 Dispose of contents/container to waste treatment facility in accordance with local and national regulations. NOTE: Before using this product, contact your doctor to determine if exposure to product or use of this product will aggravate your medical conditions. Spatter and flames from brazing may cause burns and start fires.