Note: Ingredients listed on restricted chemical lists
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
N/A
EC/CAS
231-072-3
Name of the chemical
Aluminium
Concentration
N/A
General Information
Revision date
2015-02-04
Product name
EUTECTIC 1961 CPW
Product Synonyms
EUTECTIC 1961 CPW Powder
supplier name
N94 W14355 GARWIN MACE DRIVE
Manufacturer Name
EUTECTIC CORPORATION
Icons in SDS
Company Information
company name
EUTECTIC CORPORATION
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H228, H261
Hazard statements
Code
Statements
H228
Flammable solid
Section 2
SECTION 2: Hazards identification
EMERGENCY OVERVIEW: Odorless powder mix. Flames used for powder spraying can ignite combustibles. Refer to American National Standard Z49.1 for fire prevention during welding. Dangerous when wet. HEALTH DANGER: Toxic. Danger of serious damage to health by prolonged exposure through inhalation.
Principle Routes of Exposure
Primary route of entry is the respiratory system. Other possible routes are eyes, ingestion, and/or skin contact.
Potential health effects
EYES: Inert foreign body hazard only. SKIN: Prolonged contact may result in rashes/irritations due to drying of the skin and/or mechanical abrasion related to skin-to-clothing contact or skin-to-skin contact. May cause allergic skin reaction. INGESTION: No adverse health effects anticipated by this route during proper industrial handling. INHALATION: Exposure to dust may aggravate pre-existing respiratory conditions.
Acute Health Hazards
see Section 11
Health hazards
see Section 11 WARNING This product contains or produces a chemical known to the State of California to cause birth defects (or other reproductive harm) and cancer. (California Health & Safety Code 25249.5 et seq.). WARNING: avoid breathing welding fumes and gases; they may dangerous to your health. Always use adequate ventilation and use appropriate personal protection equipment. CARCINOGENICITY WELDING FUMES (not otherwise specified) are considered to be carcinogenic defined with no further categorization by NIOSH and IARC. Package Labeling:
Supplemental label elements
although this product does not require a hazard warning label in all countries, we recommend that the safety advice should be observed: DANGER
Hazard pictograms
GHS02
Contains
Aluminum powder
Hazard statements
H228: Flammable solid H261: In contact with water releases flammable gasses
Precautionary statements
P285 In case of inadequate ventilation wear respiratory protection P314 Get medical advice if you do not feel well P280 Wear protective gloves/protective clothing/eye protection/face protection P202 Do not handle until all safety precautions have been read and understood P260 Do not breathe dust/fume/gas/mist/vapors/spray P501 Dispose of contents/container to waste treatment facility in accordance with local and national regulations CAUTION: Limited evidence of carcinogenic effect (welding fumes). May cause sensitization by skin contact Brazing/welding fumes and vapors may cause metal fume fever (headache, dizziness, dryness, cough, nausea, and fever) and these symptoms may appear 4-12 hours after exposure Before using this product, contact your doctor to determine if exposure to product or use of this product will aggravate your medical conditions.