Note: Ingredients listed on restricted chemical lists
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
N/A
EC/CAS
233-139-2/10043-35-3
Name of the chemical
Borsäure Borsäure
Concentration
N/A
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
N/A
General Information
Revision date
2014-11-01
Product name
EUTECROD 3046XFC
Product Synonyms
Eutectic 3046 XFC
supplier name
N94 W14355 GARWIN MACE DRIVE
Manufacturer Name
EUTECTIC CORPORATION
Icons in SDS
Company Information
company name
EUTECTIC CORPORATION
GHS Information
Signal word
WARNING
Section 2
SECTION 2: Hazards identification
EMERGENCY OVERVIEW Chemically stable and inert. Does not pose a fire hazard as shipped. Non-Flammable Flames used for brazing can ignite combustibles. Refer to American National Standard Z49.1 for fire prevention during welding. These products as shipped are non-hazardous, nonflammable, non-explosive, and non-reactive. In case of fire, Use NIOSH/MSHA self contained breathing apparatus.
Principle Routes of Exposure
Primary route of entry is the respiratory system. Other possible routes are eyes and/or skin contact
Potential health effects
EYES: Inert foreign body hazard only. SKIN: Rashes/irritations due to drying of the skin and/or mechanical abrasion related to skin-to-clothing contact or skin-to-skin contact. Spatter and flames from brazing may cause burns. INGESTION: Danger of serious damage to health if swallowed. INHALATION: Danger of serious damage to health by prolonged exposure through inhalation.
Acute Health Hazards
see Section 11
Health hazards
see Section 11 WARNING This product contains or produces a chemical known to the State of California to cause birth defects (or other reproductive harm) and cancer. (California Health & Safety Code 25249.5 et seq.). WARNING: avoid breathing welding fumes and gases; they may dangerous to your health. Always use adequate ventilation and use appropriate personal protection equipment. CARCINOGENICITY MANGANESE is listed by ACGIH as Group A4: Not classifiable as a human carcinogen. WELDING FUMES (not otherwise specified) are considered to be carcinogenic defined with no further categorization by NIOSH and IARC. Brazing/welding vapors and fumes from brazing/welding may cause metal fumes fever. Symptoms can appear 4 to 12 hours after. (headache, dizziness, dryness, cough, nausea and fever). May cause irritation by prolonged inhalation of brazing/welding fumes.
Precautionary statements
P285 In case of inadequate ventilation wear respiratory protection. P314 Get medical advice/attention if you feel unwell. P280 Wear protective gloves/protective clothing/eye protection/face protection. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust/fume/gas/mist/vapors/spray. P501 Dispose of contents/container to waste treatment facility in accordance with local and national regulations.
2.2 Label elements
None CAUTION: Limited evidence of carcinogenic effect (welding fumes). May cause sensitization by skin contact Brazing/welding fumes and vapors may cause metal fume fever (headache, dizziness, dryness, cough, nausea, and fever) and these symptoms may appear 4-12 hours after exposure
Supplemental label elements
As an article the product does not need to be labeled in accordance with EC-directives or respective national laws. SECTION 2 NOTES: Before using this product, contact your doctor to determine if exposure to product or use of this product will aggravate your medical conditions.